A self bow or simple bow is a bow made from a single piece of wood. Extra material such as horn nocks on the ends, or built-up handles, would normally be accepted as part of a self bow. Some modern authorities would also accept a bow spliced together in the handle from two pieces of wood.
An effective self bow can be made from widely available local material in most inhabited parts of the world, with limited tools whose functions include chopping, shaving, and scraping. A day of work may be needed, starting with a seasoned stave; a composite bow requires a week's work, and could possibly take up to several years, starting with a much greater range of materials and skills. Self bows must be approximately the height of the archer if they are to allow a long draw, and they are less efficient in the specialized art of flight archery. Well-designed composite bows of high draw-weight give higher arrow velocity, and the bow itself is shorter. However, the hide glue that holds a composite bow together absorbs water and will dissolve if soaked; the wood of self bows is less sensitive to humidity.
At the weights more usual for modern amateurs, the greater density of horn and sinew compared to wood usually cancels any advantage of composite construction. For most practical non-mounted archery purposes, self bows can perform as well as composite; "the initial velocity is about the same for all types of bow... within certain limits"
In many parts of the world including much of Africa, the Americas, northern Europe, and Southern Asia, the great majority of traditional bows are self bows. The first bow artifacts, the Stellmoor and Holmegaard artifacts of Northern Europe, are self bows. The Stellmoor bow was made from the heartwood of a Scots pine while the oldest Holmegaard bows were carved from small-diameter elms. In primitive flight archery competitions, bows inspired by the design of the Holmegaard bows perform very well because of their light, non-bending tips.
In most inhabited areas, common timbers can be made into high-quality self bows.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
In archery, a recurve bow is one of the main shapes a bow can take, with limbs that curve away from the archer when unstrung. A recurve bow stores more energy and delivers energy more efficiently than the equivalent straight-limbed bow, giving a greater amount of energy and speed to the arrow. A recurve will permit a shorter bow than the simple straight limb bow for given arrow energy, and this form was often preferred by archers in environments where long weapons could be cumbersome, such as in brush and forest terrain, or while on horseback.
A longbow (known as warbow in its time, in contrast to a hunting bow) is a type of tall bow that makes a fairly long draw possible. A longbow is not significantly recurved. Its limbs are relatively narrow and are circular or D-shaped in cross section. Flatbows can be just as long, but in cross-section, a flatbow has limbs that are approximately rectangular. Longbows for hunting and warfare have been made from many different woods in many cultures; in Europe they date from the Paleolithic era and, since the Bronze Age, were made mainly from yew, or from wych elm if yew was unavailable.
The bow and arrow is a ranged weapon system consisting of an elastic launching device (bow) and long-shafted projectiles (arrows). Humans used bows and arrows for hunting and aggression long before recorded history, and the practice was common to many prehistoric cultures. They were important weapons of war from ancient history until the early modern period, where they were rendered increasingly obsolete by the development of the more powerful and accurate firearms. Today, bows and arrows are mostly used for hunting and sports.
Molecular dynamics simulations of dislocation/obstacle interactions are enhancing our physical understanding of plasticity. However, despite increasing computational power, the interaction between simulation cell boundaries and the long ranged fields of di ...