In chromatography, the retardation factor (R) is the fraction of an analyte in the mobile phase of a chromatographic system. In planar chromatography in particular, the retardation factor RF is defined as the ratio of the distance traveled by the center of a spot to the distance traveled by the solvent front. Ideally, the values for RF are equivalent to the R values used in column chromatography. Although the term retention factor is sometimes used synonymously with retardation factor in regard to planar chromatography the term is not defined in this context. However, in column chromatography, the retention factor or capacity factor (k) is defined as the ratio of time an analyte is retained in the stationary phase to the time it is retained in the mobile phase, which is inversely proportional to the retardation factor. In chromatography, the retardation factor, R, is the fraction of the sample in the mobile phase at equilibrium, defined as: The retardation factor, RF, is commonly used in paper chromatography and thin layer chromatography for analyzing and comparing different substances. It can be mathematically described by the following ratio: An RF value will always be in the range 0 to 1; if the substance moves, it can only move in the direction of the solvent flow, and cannot move faster than the solvent. For example, if particular substance in an unknown mixture travels 2.5 cm and the solvent front travels 5.0 cm, the retardation factor would be 0.50. One can choose a mobile phase with different characteristics (particularly polarity) in order to control how far the substance being investigated migrates. An RF value is characteristic for any given compound (provided that the same stationary and mobile phases are used). It can provide corroborative evidence as to the identity of a compound. If the identity of a compound is suspected but not yet proven, an authentic sample of the compound, or standard, is spotted and run on a TLC plate side by side (or on top of each other) with the compound in question.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related courses (2)
ChE-311: Biochemical engineering
This course introduces the basic principles of bioprocess engineering and highlights the similarities and differences with chemical engineering. Without going into the fundamentals, it proposes an ove
CH-301: Analytical separation methods
Les étudiants comprennent les bases physico-chimiques des méthodes de séparation chromatographiques et électrophorétiques.
Related lectures (12)
Chromatography: Methods and Principles
Explores analytical separation methods, chromatographic principles, and quantitative techniques for accurate compound analysis.
Supercritical Fluid Chromatography: SFC and CP
Introduces Supercritical Fluid Chromatography (SFC) and Complementary Phase (CP) chromatography, highlighting their benefits and applications.
Chromatography Fundamentals
Covers the fundamentals of chromatography, including distribution constants and retention factors.
Show more
Related publications (3)

Advances in Structural Elucidation of Small Molecules via High Performance Mass Spectrometry

Konstantin Zhurov

Qualitative and quantitative analyte analysis is omnipresent: from quality control in food, pharmaceutical, biotechnology industries, to new molecular syntheses, detection of explosives and drugs, as well as natural compound mixture analysis, such as crude ...
EPFL2014

The possible role of hydroxylation in the detoxification of atrazine in mature vetiver (Chrysopogon zizanioides nash) grown in hydroponics

Jean-Paul Schwitzguebel, Sylvie Vullioud-Marcacci

The resistance mechanism of vetiver (Chrysopogon zizanioides) to atrazine was investigated to evaluate its potential for phytoremediation of environment contaminated with the herbicide. Plants known to metabolise atrazinerely on hydroxylation mediated by b ...
2005

Isolation and structural characterisation of rhamnogalacturonan oligomers generated by controlled acid hydrolysis of sugar-beet pulp

Controlled acid hydrolysis was applied to a deesterified beet pulp and the resulting soluble fraction was fractionated on a Biorad AG 1X8 column eluted by ammonium acetate pH 6 from 0.05 to 2 M. Eight retained fractions were obtained, containing almost exc ...
1997
Related concepts (3)
Thin-layer chromatography
Thin-layer chromatography (TLC) is a chromatography technique that separates components in non-volatile mixtures. It is performed on a TLC plate made up of a non-reactive solid coated with a thin layer of adsorbent material. This is called the stationary phase. The sample is deposited on the plate, which is eluted with a solvent or solvent mixture known as the mobile phase (or eluent). This solvent then moves up the plate via capillary action.
Chromatography
In chemical analysis, chromatography is a laboratory technique for the separation of a mixture into its components. The mixture is dissolved in a fluid solvent (gas or liquid) called the mobile phase, which carries it through a system (a column, a capillary tube, a plate, or a sheet) on which a material called the stationary phase is fixed. Because the different constituents of the mixture tend to have different affinities for the stationary phase and are retained for different lengths of time depending on their interactions with its surface sites, the constituents travel at different apparent velocities in the mobile fluid, causing them to separate.
High-performance liquid chromatography
High-performance liquid chromatography (HPLC), formerly referred to as high-pressure liquid chromatography, is a technique in analytical chemistry used to separate, identify, and quantify each component in a mixture. It relies on pumps to pass a pressurized liquid solvent containing the sample mixture through a column filled with a solid adsorbent material. Each component in the sample interacts slightly differently with the adsorbent material, causing different flow rates for the different components and leading to the separation of the components as they flow out of the column.

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.