Electrokinetic phenomena are a family of several different effects that occur in heterogeneous fluids, or in porous bodies filled with fluid, or in a fast flow over a flat surface. The term heterogeneous here means a fluid containing particles. Particles can be solid, liquid or gas bubbles with sizes on the scale of a micrometer or nanometer. There is a common source of all these effects—the so-called interfacial 'double layer' of charges. Influence of an external force on the diffuse layer generates tangential motion of a fluid with respect to an adjacent charged surface. This force might be electric, pressure gradient, concentration gradient, or gravity. In addition, the moving phase might be either continuous fluid or dispersed phase.
Various combinations of the driving force and moving phase determine various electrokinetic effects. According to J.Lyklema, the complete family of electrokinetic phenomena includes:
electrophoresis, as motion of particles under influence of electric field;
electro-osmosis, as motion of liquid in porous body under influence of electric field;
diffusiophoresis, as motion of particles under influence of a chemical potential gradient;
capillary osmosis, as motion of liquid in porous body under influence of the chemical potential gradient;
sedimentation potential, as electric field generated by sedimenting colloid particles;
streaming potential/current, as either electric potential or current generated by fluid moving through porous body, or relative to flat surface;
colloid vibration current, as electric current generated by particles moving in fluid under influence of ultrasound;
electric sonic amplitude, as ultrasound generated by colloidal particles in oscillating electric field.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
In this course we study heat transfer (and energy conversion) from a microscopic perspective. First we focus on understanding why classical laws (i.e. Fourier Law) are what they are and what are their
Introduction to the assembly of materials by homogeneous or heterogeneous joints (welding, bonding, mechanical assembly). Mechanical and environmental resistance of joints.
In surface science, a double layer (DL, also called an electrical double layer, EDL) is a structure that appears on the surface of an object when it is exposed to a fluid. The object might be a solid particle, a gas bubble, a liquid droplet, or a porous body. The DL refers to two parallel layers of charge surrounding the object. The first layer, the surface charge (either positive or negative), consists of ions which are adsorbed onto the object due to chemical interactions.
Electrophoresis is the motion of dispersed particles relative to a fluid under the influence of a spatially uniform electric field. Electrophoresis of positively charged particles (cations) is sometimes called cataphoresis, while electrophoresis of negatively charged particles (anions) is sometimes called anaphoresis. The electrokinetic phenomenon of electrophoresis was observed for the first time in 1807 by Russian professors Peter Ivanovich Strakhov and Ferdinand Frederic Reuss at Moscow University, who noticed that the application of a constant electric field caused clay particles dispersed in water to migrate.
Electroosmotic flow (or electro-osmotic flow, often abbreviated EOF; synonymous with electroosmosis or electroendosmosis) is the motion of liquid induced by an applied potential across a porous material, capillary tube, membrane, microchannel, or any other fluid conduit. Because electroosmotic velocities are independent of conduit size, as long as the electrical double layer is much smaller than the characteristic length scale of the channel, electroosmotic flow will have little effect.
It is of great interest to the energy community to understand how the mechano-physico-chemical phenomena that eventually lead to device degradation are related to the startup, operation, and shutdown phases. For electrocatalytic systems operating in liquid ...
Photocatalytic applications play an essential role in the search for alternative energy sources and environmental decontamination techniques. It is of fundamental interest to understand on a molecular level the aqueous solid/liquid interface, where photoca ...
Renewable energy deployment and implementation of a circular economy will play a crucial role in decreasing CO2 emissions to meet the target from the Paris agreement.
Dye-sensitized solar cells (DSSCs) can be designed in various colors and transparency for ...