Fire striker

A fire striker is a piece of carbon steel from which sparks are struck by the sharp edge of flint, chert or similar rock. It is a specific tool used in fire making. Before the invention of matches, percussion fire making was often used to start fires. Before the advent of steel, a variety of iron pyrite or marcasite was used with flint and other stones to produce a high-temperature spark that could be used to create fire. There are indications that the Iceman, also known as Ötzi, may have used iron pyrite to make fire. From the Iron Age forward, until the invention of the friction match in the early 1800s by John Walker, the use of flint and steel was a common method of fire lighting. Percussion fire-starting was prevalent in Europe during ancient times, the Middle Ages and the Viking Age. When flint and steel were used, the fire steel was often kept in a metal tinderbox together with flint and tinder. In Tibet and Mongolia, they were instead carried in a leather pouch called a chuckmuck. In Japan, percussion fire making was performed using agate or even quartz. It was also used as a ritual to bring good luck or ward off evil. The type and hardness of steel used is important. High carbon steels (1060, W1, tool steels, etc.) generate sparks easily. Iron and alloys (like stainless steel, 5160, etc.) are more difficult and generate fewer sparks. The steel must be hardened but softer than the flint-like material striking off the spark. Old files, leaf and coil springs, and rusty gardening tools are often repurposed as strikers. Besides flint, other hard, non-porous rocks that can take a sharp edge can be used, such as chert, quartz, agate, jasper or chalcedony. The sharp edge of the flint is used to violently strike the fire steel at an acute angle in order to cleave or shave off small particles of metal. The pyrophoricity of the steel results in the shavings oxidising in the air. The molten, oxidising sparks then ignite tinder. The tinder is best held next to the flint while the steel striker is quickly slid down against the flint, casting sparks into the tinder.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts (6)

Fire making

Fire making, fire lighting or fire craft is the process of artificially starting a fire. It requires completing the fire triangle, usually by heating tinder above its autoignition temperature. Fire is an essential tool for human survival and the use of fire was important in early human cultural history since the Lower Paleolithic. Today, it is a key component of Scouting and bushcraft.

Ferrocerium

Ferrocerium (also known in Europe as Auermetall) is a synthetic pyrophoric alloy of mischmetal (cerium, lanthanum, neodymium, other trace lanthanides and some iron – about 95% lanthanides and 5% iron) hardened by blending in oxides of iron and/or magnesium. When struck with a harder material, the mixture produces hot sparks that can reach temperatures of when rapidly oxidized by the process of striking the rod. Striking both scrapes fragments off, exposing them to the oxygen in the air, and easily ignites them by friction heat due to cerium's remarkably low ignition temperature of between .

Fire piston

A fire piston, sometimes called a fire syringe or a slam rod fire starter, is a device of ancient Southeast Asian origin which is used to kindle fire. In Malay it is called "gobek api" . It uses the principle of the heating of a gas (in this case air) by rapid and adiabatic compression to ignite a piece of tinder, which is then used to set light to kindling. A fire piston consists of a hollow cylinder sealed at one end and open at the other. Sizes range in length from 3 to 6 inches (7.5 to 15 cm) with a bore about 0.