Arrayed waveguide gratings (AWG) are commonly used as optical (de)multiplexers in wavelength division multiplexed (WDM) systems. These devices are capable of multiplexing many wavelengths into a single optical fiber, thereby increasing the transmission capacity of optical networks considerably. The devices are based on a fundamental principle of optics, which states that light waves of different wavelengths do not interfere linearly with each other. This means that, if each channel in an optical communication network makes use of light of a slightly different wavelength, then the light from many of these channels can be carried by a single optical fiber with negligible crosstalk between the channels. The AWGs are used to multiplex channels of several wavelengths onto a single optical fiber at the transmission end and are also used as demultiplexers to retrieve individual channels of different wavelengths at the receiving end of an optical communication network. Conventional silica-based AWGs, as illustrated in the figure above, are planar lightwave circuits fabricated by depositing layers of doped and undoped silica on a silicon substrate. The AWGs consist of a number of input (1) and output (5) couplers, a free space propagation region (2) and (4) and the grating waveguides (3). The grating waveguides consists of many waveguides, each having a constant length increment (ΔL). Light is coupled into the device via an optical fiber (1) connected to the input port. Light diffracting out of the input waveguide at the coupler/slab interface propagates through the free-space region (2) and illuminates the grating with a Gaussian distribution. Each wavelength of light coupled to the grating waveguides (3) undergoes a constant change of phase attributed to the constant length increment in grating waveguides. The diffracted light from each waveguide within the grating undergoes constructive interference, resulting in a refocusing of the light at the output waveguides (5).

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related courses (8)
MICRO-423: Optics laboratories (spring)
This laboratory work allows students to deepen their understanding of optical instruments, optoelectronic devices and diagnostic methods. Students will be introduced in state of the art optical instru
MICRO-424: Optics laboratories (autumn)
This laboratory work allows students to deepen their understanding of optical instruments, optoelectronic devices and diagnostic methods. Students will be introduced in state of the art optical instru
MICRO-321(a): Optical engineering (for MT)
Ce cours présente différentes facettes de l'optique moderne et met à la fois l'accent sur des bases rigoureuses et des applications pratiques. Le cours inclut une partie théorique avec un cours et des
Show more
Related lectures (11)
Advanced Manufacturing in Fiber Technologies: Metallic Glasses
Explores the thermal drawing of metallic glasses and the fabrication of liquid metal-based fibers for various applications.
Supercontinuum Generation: Nonlinear Effects and Soliton Dynamics
Covers nonlinear effects in supercontinuum generation, soliton dynamics, and trends in fiber optics.
Optical Fiber Waveguides
Explores optical fiber waveguides, covering modes of propagation, single-mode, multimode fibers, manufacturing, and applications in data transmission.
Show more
Related publications (49)

Three-dimensional fabrication of sub-micron optical waveguides in PDMS and other polymer materials

Giulia Panusa

Optical waveguides are one of the most important photonic components. They are indispensable tools in many of today’s technologies because of their capacity of guiding light. In particular, compact, low loss, flexible polymer optical waveguides are cruci ...
EPFL2021

Exploring nonlinearities in multimode optical fibers for lasers and computing

Ugur Tegin

Multimode optical fibers are the backbone of telecommunication and medical imaging. When light with high intensity travels through a multimode fiber, photons and matter start to interact and propa-gation becomes nonlinear. The nonlinear propagation of ligh ...
EPFL2021

Difference frequency generation in optically poled silicon nitride waveguides

Camille Sophie Brès, Ozan Yakar, Boris Zabelich, Edgars Nitiss, Ezgi Sahin

All-optical poling leads to an effective second-order nonlinearity (chi((2))) in centrosymmetric materials without the need for sophisticated fabrication techniques or material processing, through the periodic self-organization of the charges. The absence ...
SPIE-INT SOC OPTICAL ENGINEERING2021
Show more
Related concepts (1)
Optical fiber
An optical fiber, or optical fibre in Commonwealth English, is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair. Optical fibers are used most often as a means to transmit light between the two ends of the fiber and find wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data transfer rates) than electrical cables.

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.