Are you an EPFL student looking for a semester project?
Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.
Concept
Giant magnetoimpedance
Summary
In materials science Giant Magnetoimpedance (GMI) is the effect that occurs in some materials where an external magnetic field causes a large variation in the electrical impedance of the material. It should not be confused with the separate physical phenomenon of Giant Magnetoresistance.
GMI is caused by the penetration length that is a measure of how deep an ac electrical current can flow inside an electrical conductor. The penetration length (also known as the skin-depth effect) increases with the square root of the electrical resistivity of the material and is inversely proportional to the square root of the product of the magnetic permeability and the frequency of the ac electrical current. Thus, in materials with very high values of magnetic permeability, such as soft-ferromagnetic materials, the penetration-length can be much less than the thickness of the conductor even for moderate values of frequencies driving the current near the surface of the material.
When an external magnetic field is applied, the size of the permeability diminishes, increasing the penetration of the current in the magnetic material. Large variations are observed in both in-phase and out-of-phase components of the magnetoimpedance for applied magnetic fields close to the value of the Earth magnetic field up to few tens of Oersted. For comparison, in normal electrical conductors the effect of the skin-depth becomes important for frequencies in the microwave range only.
Despite the fact that the dependence of the GMI on the geometry of the electrical conductor (ribbons, wires, multilayers meander-likes) and external parameters is somewhat complex, there are theoretical models that allow calculation of the GMI to within some approximations. Beside the dependence of the GMI on the frequency of the current there are other sources that contribute to the frequency dependence of the GMI, such as the motion of the domain wall and the ferromagnetic resonance.
A typical experimental set-up for investigating the GMI in research laboratories is shown below.
Official source
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.