In music, fingering, or on stringed instruments sometimes also called stopping, is the choice of which fingers and hand positions to use when playing certain musical instruments. Fingering typically changes throughout a piece; the challenge of choosing good fingering for a piece is to make the hand movements as comfortable as possible without changing hand position too often. A fingering can be the result of the working process of the composer, who puts it into the manuscript, an editor, who adds it into the printed score, or the performer, who puts his or her own fingering in the score or in performance. Fingering...also stopping...(1) A system of symbols (usually Arabic numbers) for the fingers of the hand (or some subset of them) used to associate specific notes with specific fingers....(2)Control of finger movements and position to achieve physiological efficiency, acoustical accuracy [frequency and amplitude] (or effect) and musical articulation. A substitute fingering is an alternative to the indicated fingering, not to be confused with finger substitution. Depending on the instrument, not all the fingers may be used. For example, saxophonists do not use the right thumb and string instruments (usually) only use the fingers and not the thumbs. Fingering applies to the rotary and piston valves employed on many brass instruments. The trombone, a fully chromatic brass instrument without valves, employs equivalent numbered notation for slide positions rather than fingering. In notation for keyboard instruments, numbers are used to relate to the fingers themselves, not the hand position on the keyboard. In modern scores, the fingers are numbered from 1 to 5 on each hand: the thumb is 1, the index finger is 2, the middle finger is 3, the ring finger is 4 and the little finger is 5. Earlier usage varied by region. In Britain in the 19th century, the thumb was shown by a cross (+) and the fingers were numbered from 1 to 4. This was known as "English fingering" while the other way (from 1 to 5) was known as "Continental fingering.

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Cours associés (1)
MSE-474: Materials selection
Propose suitable materials, design, and production routes depending on different performance criteria using a computer based software approach. The course is based on Prof. Mike Ashby's well known "As
Publications associées (3)

Guessing the Fingerings

Samuel Pierre Rey

Some strings instruments, such as guitar or violin, can play the same note using different fingerings. To find out which string has been used, we developed an algorithm that compute the inharmonicity of a given audio sample, and then use it to identify the ...
2018

Guessing the fingerings from musical recordings

Paolo Prandoni, Arnaud Latty, Frederike Dümbgen

Synopsis: This project is about using musical recordings of string instruments to determine on which strings notes have been played. It includes the study of the spectral content of the recordings and the development of a robust classifica ...
2012

Reed vibration in lingual organ pipes without the resonators

Vibrations of plucked and blown reeds of lingual organ pipes without the resonators have been investigated. Three rather surprising phenomena are observed: the frequency of the reed plucked by hand is shifted upwards for large-amplitude plucking, the blown ...
2003
Concepts associés (3)
Instrument de musique
right|thumb|280px|Fresque étrusque de la tombe des Léopards à Monterozzi en Italie. right|thumb|280px|Planche illustrée d'instruments de musique extraite du "Systematische Bilder-Gallerie zur allgemeinen deutschen Real Encyclopädie in lithographirten Blättern" (1842) Un instrument de musique est un objet pouvant produire un son contrôlé par un musicien — que cet objet soit conçu dans cet objectif, ou bien qu'il soit modifié ou écarté de son usage premier.
Instrument à cordes
Un instrument à cordes est un instrument de musique dans lequel le son est produit par la vibration d'une ou plusieurs cordes. L'organologie les classe dans la catégorie des cordophones. L'histoire des instruments à cordes est vieille de plusieurs milliers d'années. Les premiers n'avaient probablement qu'une seule corde, comme l'arc musical. Dès l'Égypte ancienne, on connaissait les joueurs de harpe. Au Moyen Âge, les ménestriers s'accompagnaient au luth, etc. La vibration de la corde seule est peu audible.
Flûte
vignette|Le Sommeil de l’Enfant Jésus (détail), Francesco Trevisani (musée du Louvre). Flûte (ou flute) est un terme générique désignant un instrument de musique à vent dont le son est créé par l'oscillation d'un jet d’air autour d'un biseau droit, en encoche ou en anneau. Ce souffle peut être dirigé librement par l'instrumentiste dans le cas des flûtes traversières, des instruments de type quena ou encore des flûtes de Pan, ou canalisé par un conduit en étant émis par le musicien lui-même dans le cas des différents types flûtes à bec ou en étant créé par une soufflerie mécanique dans le cas du jeu d'orgue.

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.