A micromachined earth sensor based on measuring the gravity gradient torque

Related publications (28)

About
Privacy
Disclaimer

Graph Chatbot

Human Head Yaw Estimation based on Two 3-axis Accelerometers

Hervé Lissek, Gilles André Courtois, Vincent Pierre Olivier Grimaldi

The estimation of the orientation of an object, and a human head in particular, can be defined by the Euler angles: the yaw, pitch and roll. The robust and drift-free estimation of those angles is usually achieved with the data from several sensors such as ...

2022

Lidar point-to-point correspondences for rigorous registration of kinematic scanning in dynamic networks

Jan Skaloud, Davide Antonio Cucci, Aurélien Arnaud Brun

With the objective of improving the registration of lidar point clouds produced by kinematic scanning systems, we propose a novel trajectory adjustment procedure that leverages on the automated extraction of selected reliable 3D point–to–point corresponden ...

2022

Intensifying space activity calls for increased scrutiny of risks

Romain Buchs

As the pace of space activities accelerates and societies become more reliant on space-based systems, the associated risks deserve more attention. Satellites form a critical infrastructure on which military, civil and commercial entities rely. The services ...

EPFL International Risk Governance Center2021

Integration of MEMS in Silicon Photonics

Alain Yuji Takabayashi

Like integrated electronics, integrated photonics such as Silicon Photonics benefit from increased device-density on a single chip. Silicon is an excellent material for integrated photonics because its high refractive index allows devices to be made small, ...

EPFL2021

Biomechanical Ambulatory Assessment of 3D Knee Angle Using Novel Inertial Sensor-Based Technique

Kamiar Aminian, Lai Kuan Tham

Three-dimensional (3D) knee angle measurement is one of the key measures in human gait analysis. Inertial sensor capable of measuring joint motion under unconstrained conditions is a practical tool for clinical evaluation and rehabilitation. An inertial me ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Simulation Tool : Resources Management in High Performance Avionic for ADR Missions

Jean-Paul Richard Kneib, Michaël Yannick Juillard

This paper describes the second iteration in the development of a simulation tool that provides trade-offs of avionic architectures for future Active Debris Removal (ADR) space missions. ...

IEEE2021

X-ray pulsar-based GNC system for formation flying in high Earth orbits

Volker Gass, Camille Sébastien Pirat

In this paper, comprehensive pulsar-based Guidance, Navigation and Control (GNC) system is designed and applied to satellites formation flying. The complete autonomy of the X-ray pulsar navigation technology provides both absolute and relative positioning ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Antennas for CubeSat Communication

Miroslav Veljovic

CubeSats are a type of small satellites (< 500 kg) that weigh several kilograms and consist of multiple Units (U) measuring 100 × 100 × 113.5 mm3. CubeSats emerged as a low-cost alternative to conventional large satellites, and have since demonstrated capa ...

EPFL2020

On the calibration aspects of MEMS-IMUs used in micro UAVs for sensor orientation

Jan Skaloud, Philipp Clausen

We introduce a three step procedure to improve attitude determination by MEMS-IMU sensors on board a small UAV. IMU pre-calibration is performed first and only once in the lab; second in a simplified version and for every switch-on in the field. Together, ...

IEEE/ION2020

Sun-synchronous repeat ground tracks and other useful orbits for future space missions

Sun Hee Kim, Luzius Gregor Kronig

The development of oceanography and meteorology has greatly benefited from satellite-based data of Earth's atmosphere and ocean. Traditional Earth observation missions have utilised Sun-synchronous orbits with repeat ground tracks due to their advantages i ...

2020

Page 2 of 3

IEEE2021