Deformation and degradation of superelastic NiTi under multiaxial loading

Related publications (32)

Page 3 of 4

About
Privacy
Disclaimer

Graph Chatbot

Microstructural Evolution Study of Fe-Mn-Al-C Steels Through Variable Thermomechanical Treatments

Roland Logé, Oscar Zambrano Zambrano

The microstructural evolution of the two austenitic alloys Fe-20Mn-3Al-0.7C wt pct and Fe-20Mn-6Al-0.7C wt pct when different thermal and thermomechanical treatments are performed has been studied. To this end, a generic industrial die of 100 ton capacity ...

SPRINGER2021

Inverse design of diffractive optical elements using step-transition perturbation approach

Toralf Scharf, Dong Cheon Kim

Diffractive optical elements are ultra-thin optical components required for a variety of applications because of their high design flexibility. We introduce a gradient-based optimization method based on a step-transition perturbation approach which is an e ...

WALTER DE GRUYTER GMBH2021

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

Roland Logé

Two new ferrito-martensitic oxide dispersion strengthened (ODS) steels reinforced with (Y, Ti, O) nanoparticles were elaborated using a high-energy attritor. The milled powder was consolidated by hot extrusion at 1050 degrees C. The two types of ODS steels ...

ELSEVIER SCI LTD2021

ON THE DESIGN AND OPTIMIZATION OF WIDE ANGLE DIFFRACTIVE OPTICAL ELEMENTS

Dong Cheon Kim

Diffractive optical elements (DOEs) which consist of microstructure surface relief permit the generation of the spatial distribution of light beams by using a single element. Due to their compact size, design flexibility, and mass productivity, they are us ...

EPFL2021

Deciphering the interactions between single arm dislocation sources and coherent twin boundary in nickel bi-crystal

Helena Van Swygenhoven

The introduction of a well-controlled population of coherent twin boundaries (CTBs) is an attractive route to improve the strength ductility product in face centered cubic (FCC) metals. However, the elementary mechanisms controlling the interaction between ...

Nature Research2021

Crystallization kinetics of atomic crystals revealed by a single-shot and single-particle X-ray diffraction experiment

Christoph Bostedt, Alessandro Colombo, Giorgio Rossi

Crystallization is a fundamental natural phenomenon and the ubiquitous physical process in materials science for the design of new materials. So far, experimental observations of the structural dynamics in crystallization have been mostly restricted to slo ...

National Academy of Sciences2021

Giant hardening response in AlMgZn(Cu) alloys

William Curtin, Daniel John Gilles Marchand

This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Hydraulic fracture growth in quasi-brittle materials

Dong Liu

Hydraulic fracturing is a technique often used in the oil and gas industry to enhance the production of wells in low-permeability reservoirs. It consists of fluid injection at a sufficiently large injection rate to create and propagate tensile fractures in ...

EPFL2021

Theory of kink migration in dilute BCC alloys

William Curtin, Alireza Ghafarollahi

Plastic deformation in elemental BCC metals and dilute alloys is controlled by the slower of the kink pair nucleation and kink migration processes along screw dislocations. In alloys nucleation is facilitated and migration inhibited, leading to a concentra ...

2021

Influence of Joule Effect Heating on Recrystallization Phenomena in Inconel 718

Roland Logé, Mathijs Pieter van der Meer

In this article, the Joule effect heating influence on recrystallization phenomena in the Inconel 718 nickel-based superalloy is investigated in details. On the one hand, static recrystallization kinetic studies at 1020 degrees C after cold deformation up ...

SPRINGER2021

Page 3 of 4