Publication

Tubular gas preconcentrators based on inkjet printed micro-hotplates on foil

Related publications (24)

Influence of Joule Effect Heating on Recrystallization Phenomena in Inconel 718

Roland Logé, Mathijs Pieter van der Meer

In this article, the Joule effect heating influence on recrystallization phenomena in the Inconel 718 nickel-based superalloy is investigated in details. On the one hand, static recrystallization kinetic studies at 1020 degrees C after cold deformation up ...

SPRINGER2021

Designing compliant mechanisms composed of shape memory alloy and actuated by induction heating

Yves Perriard, Paolo Germano, Thomas Guillaume Martinez, Adrien Jean-Michel Thabuis, Sean Thomas

Shape Memory Alloys (SMAs) are a type of smart materials that reacts mechanically to heat. Due to their complex behavior, they are often used in a simple geometry such as wires. This constrains the output displacement of the alloy to a simple linear contra ...

2021

System for co2 capture from internal combustion engine

François Maréchal, Shivom Sharma

System (2) for CO2 capture from a combustion engine (1) comprising an exhaust gas flow circuit (6) having an inlet end fluidly connected to an exhaust of the combustion engine, a heat exchanger circuit (12), a primary exhaust gas heat exchanger (H1) for tr ...

2020

Energy, indoor air quality, occupant behavior, self-reported symptoms and satisfaction in energy-efficient dwellings in Switzerland

Dusan Licina, Shen Yang

We performed the first large-scale investigation of indoor air quality (IAQ), energy and occupant behavior and satisfaction, in 650 energy-efficient dwellings in western Switzerland. The investigation included comparative assessment of 217 green-certified ...

2020

Direct gyrokinetic comparison of pedestal transport in JET with carbon and ITER-like walls

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Alessandro Pau, Henri Weisen

This paper compares the gyrokinetic instabilities and transport in two representative JET pedestals, one (pulse 78697) from the JET configuration with a carbon wall (C) and another (pulse 92432) from after the installation of JET's ITER-like Wall (ILW). Th ...

IOP Publishing Ltd2019

Self-consistent pedestal prediction for JET-ILW in preparation of the DT campaign

Olivier Sauter, Ambrogio Fasoli, Yiming Li, Basil Duval, Jonathan Graves, Duccio Testa, Patrick Blanchard, Federico Alberto Alfredo Felici, Alessandro Pau, Cristian Sommariva

The self-consistent core-pedestal prediction model of a combination of EPED1 type pedestal prediction and a simple stiff core transport model is able to predict Type I ELMy (edge localized mode) pedestals of a large JET-ILW (ITER-like wall) database at the ...

2019

Numerical simulations of hole carrier selective contacts in p-type c-Si solar cells

Christophe Ballif, Andrea Ingenito, Philipp Friedrich Hermann Löper

This work presents a systematic analysis of the transport mechanism and surface passivation of tunneling oxide (SiO2)/p-type poly-silicon (poly-Si(p)) junctions applied to p-type crystalline silicon (c-Si) solar cells by means of TCAD numerical simulations ...

ELSEVIER2019

Role of fast ion pressure in the isotope effect in JET L-mode plasmas

Olivier Sauter, Ambrogio Fasoli, Yiming Li, Basil Duval, Jonathan Graves, Duccio Testa, Patrick Blanchard, Henri Weisen, Federico Nespoli, Alessandro Pau

This paper presents results of JET ITER-like wall L-mode experiments in hydrogen and deuterium (D) plasmas, dedicated to the study of the isotope dependence of ion heat transport by determination of the ion critical gradient and stiffness by varying the io ...

IOP Publishing Ltd2019

Long-term performance and life cycle assessment of energy piles in three different climatic conditions

Lyesse Laloui, Alessio Ferrari, Melis Sütman, Gianluca Speranza

The main purpose behind the use of energy piles is to enable the exploitation of geothermal energy for meeting the heating/cooling demands of buildings in an efficient and environment-friendly manner. However, the long-term performance of energy piles in d ...

Pergamon-Elsevier Science Ltd2020

Radial variation of heat transport in L-mode JET discharges

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Martinus Gijs, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Bruno Emanuel Ferreira De Sousa Correia

In this paper, we analyze heat transport in the JET tokamak using data from its high resolution ECE diagnostic and analyses based on the transfer entropy (TE). The analysis reveals that heat transport is not smooth and continuous, but is characterized by ' ...

IOP Publishing Ltd2019