Publications related to Edge strength model for glass based on the mirror zone depth

Real-time Personalized Monitoring of Neurological Disorders on Wearable Systems

The terminology of neurological disorders encompasses a range of serious illnesses (e.g., epilepsy, Alzheimer's disease) leading to morbidity, disability, and stigma. Epilepsy alone affects over 50 million people worldwide, and these figures are rising as ...

EPFL2023

Accurate color characterization of solar photovoltaic modules for building integration

Christophe Ballif, Antonin Faes, Alessandro Francesco Aldo Virtuani, Jordi Escarre Palou, Alejandro Borja Block

Accurate and reproducible color characterization is essential for colored building integrated photovoltaic products, both for manufacturing quality control and assessing long-term color stability. However, existing characterization techniques struggle to a ...

Pergamon-Elsevier Science Ltd2023

Formation Mechanism of Elemental Te Produced in Tellurite Glass Systems by Femtosecond Laser Irradiation

Yves Bellouard, Gözden Torun

The formation of elemental trigonal tellurium (t-Te) on tellurite glass surfaces exposed to femtosecond laser pulses is discussed. Specifically, the underlying elemental crystallization phenomenon is investigated by altering laser parameters in common tell ...

Wiley2023

Investigation of femtosecond laser-enabled 3D micro-infiltration processes

Enrico Casamenti

In the last decades, the femtosecond laser micromachining of glass has attracted a lot of attention due to its three-dimensional manufacturing ability and flexibility both in terms of compatible substrates and modification types. Yet, to fully unravel its ...

EPFL2022

Effect of window glazing color and transmittance on human visual comfort

Marilyne Andersen, Jan Wienold, Sneha Jain

: Occupants’ visual comfort in an indoor space strongly depend on the quantity and quality of the daylight inside the space which can be altered with the type of window glazing. In this study, we compared the visual comfort perception of participants with ...

2022

The role of Encapsulants in the long-term performance of advanced Crystalline Silicon Glass-Glass PV modules

Luca Gnocchi

The adoption of crystalline silicon (c-Si) PV modules based on glass-glass (G-G) structures is gaining momentum because of the possibility to manufacture bifacial panels, collecting light from the rear side. Despite not being an optimal material, Ethylene ...

EPFL2022

Explosive fragmentation of Prince Rupert's drops leads to well-defined fragment sizes

Jean-François Molinari

Anyone who has ever broken a dish or a glass knows that the resulting fragments range from roughly the size of the object all the way down to indiscernibly small pieces: typical fragment size distributions of broken brittle materials follow a power law, an ...

Nature Research2021

Flexural behaviour of post-tensioned glass beams: Experimental and analytical study of three beam typologies

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

The concept of post-tensioned glass beams builds on the concrete analogy of the reinforced glass beams. By additionally prestressing the reinforcement in a post-tensioned system, a compressive pre-stress is applied on the glass, enhancing the initial fract ...

2021

Ug-value and edge heat loss of triple glazed insulating glass units:A comparison between measured and declared values

Andreas Schueler, Anna Krammer

Triple glazed low-e coated insulating glass units with argon filling of five different suppliers on the European market with a declared thermal transmittance in the undisturbed centre of glass (Ug-value) of 0.6 W/m(2)K have been purchased from resellers an ...

ELSEVIER2021

Passive diamagnetic contactless suspension rotor with electrostatic glass motor

Hannes Bleuler, Yuanping Xu, Ryosuke Kan, Jin Zhou

In this work, we introduce a newly developed passive and frictionless diamagnetic contactless suspension rotor with electrostatic glass motor. A 20 mm diameter disc-shaped rotor comprised of pyrolytic graphite with glass is fabricated. The rotor is diamagn ...

INST ENGINEERING TECHNOLOGY-IET2019