Publications associées à Capsizing due to friction-induced twist in the failure of stopper knots

The strength of surgical knots involves a critical interplay between friction and elastoplasticity

Pedro Miguel Nunes Pereira de Almeida Reis, Paul Johanns, Paul Grandgeorge, Changyeob Baek

Knots are the weakest link in surgical sutures, serving as mechanical ligatures between filaments. Exceeding their safe operational limits can cause fatal complications. The empirical nature of present guidelines calls for a predictive understanding of the ...

AMER ASSOC ADVANCEMENT SCIENCE2023

Mechanics of Physical Knots: From Filaments in Contact to Surgical Suturing

Paul Johanns

In this thesis, we study the mechanics of tight physical knots. Knots are omnipresent in surgery, climbing, and sailing, with disastrous consequences when the filament or the rope fails to perform its function. Even if the importance of mechanical analysis ...

EPFL2023

Exploring the inner workings of the clove hitch knot

Pedro Miguel Nunes Pereira de Almeida Reis, Paul Johanns, Tomohiko Sano, Paul Grandgeorge, Changyeob Baek

We perform a combined experimental and computational investigation of the clove hitch knot. We develop a physical model for the clove hitch by tying an elastic rod onto a rigid cylinder. In the experiments, we characterize the mechanical performance, geome ...

ELSEVIER2022

Onset of sliding across scales: How the contact topography impacts frictional strength

Jean-François Molinari, Fabian Barras, Ramin Aghababaei

When two solids start rubbing together, frictional sliding initiates in the wake of slip fronts propagating along their surfaces in contact. This macroscopic rupture dynamics can be successfully mapped on the elastodynamics of a moving shear crack. However ...

AMER PHYSICAL SOC2021

Finite Element Modeling of Tight Elastic Knots

Pedro Miguel Nunes Pereira de Almeida Reis, Tomohiko Sano, Paul Johanns, Changyeob Baek, Paul Grandgeorge

We present a methodology to simulate the mechanics of knots in elastic rods using geometrically nonlinear, full three-dimensional (3D) finite element analysis. We focus on the mechanical behavior of knots in tight configurations, for which the full 3D defo ...

2020

Variational phase-field continuum model uncovers adhesive wear mechanisms in asperity junctions

Jean-François Molinari, Sylvain Collet

Wear is well known for causing material loss in a sliding interface. Available macroscopic approaches are bound to empirical fitting parameters, which range several orders of magnitude. Major advances in tribology have recently been achieved via Molecular ...

2020

Optimization of multi-directional fiber architecture for resistance and ductility of bolted FRP profile joints

Thomas Keller, Lulu Liu, Xin Wang

In view of the low structural efficiency of bolted joints in pultruded fiber-reinforced polymer (FRP) profiles with mainly unidirectional (UD) fiber architecture, off-axis plies were considered as an effective way to improve bolted joint performance. An ex ...

ELSEVIER SCI LTD2020

Statistical Fatigue Investigation and Failure Prediction of a Healable Composite System

Véronique Michaud, Amaël Maximilien Cohades, Nathan Klaus Hostettler

Fiber reinforced polymers are massively used as an alternative to metals in structural applications. The brittle nature of their matrix, however, makes them more susceptible to crack formation and propagation resulting in costly repair operations and incre ...

2020

Effect of a second layer on the time to failure of compressed riprap as mountain riverbank protection

Anton Schleiss, Michael Pfister, Mário Jorge Rodrigues Pereira Da Franca, Mona Jafarnejad Chaghooshi

Recently, Jafarnejad, Franca, Pfister, and Schleiss [2017. Time-based failure analysis of compressed riverbank riprap. Journal of Hydraulic Research, 55(2), 224–235. doi: 10.1080/00221686.2016.1212940] presented an experimental study on the stability of co ...

Taylor & Francis Ltd2019

Interparticle Friction Leads to Nonmonotonic Flow Curves and Hysteresis in Viscous Suspensions

Matthieu Wyart, Hugo Robin Louis Perrin

Hysteresis is a major feature of the solid-liquid transition in granular materials. This property, by allowing metastable states, can potentially yield catastrophic phenomena such as earthquakes or aerial landslides. The origin of hysteresis in granular fl ...

American Physical Society2019