Printing of NiO-YSZ nanocomposites: from continuous synthesis to inkjet deposition

Publications associées (26)

Page 2 sur 3

À propos
Confidentialité
Mentions légales

Graph Chatbot

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Herbert Shea, Samuel Rosset, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

New Approach to Synthesis of Tetralin via Naphthalene Hydrogenation in Supercritical Conditions Using Polymer-Stabilized Pt Nanoparticles

Lioubov Kiwi

Supercritical (SC) fluid technologies are well-established methods in modern green chemical synthesis. Using SC fluids as solvents instead of traditional liquids gives benefits of higher diffusivity and lower viscosity, which allows mass transfer intensifi ...

2020

New approach for time-resolved and dynamic investigations on nanoparticles agglomeration

Francesco Stellacci, Antonia Neels, Urszula Beata Cendrowska, Alex Dommann, Claudio Toncelli

Nanoparticle (NP) colloidal stability plays a crucial role in biomedical application not only for human and environmental safety but also for NP efficiency and functionality. NP agglomeration is considered as a possible process in monodispersed NP colloida ...

TSINGHUA UNIV PRESS2020

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Hubert Girault, Andreas Stephan Lesch, Victor Costa Bassetto, Massimo Rosa

Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...

AMER CHEMICAL SOC2020

Inkjet‐Printed Composites for Room‐Temperature VOC Sensing: From Ink Formulation to Sensor Characterization

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

The authors report the fabrication and characterization of chemiresistive sensors, composed of a thermoplastic elastomer (TPE), styrene‐ethylene‐ran‐butylene‐styrene, and a high‐structure carbon black (CB) targeted for detecting hydrocarbons at or near roo ...

Wiley2020

Supercritical water anomalies in the vicinity of the Widom line

Christian Ludwig

Supercritical water is used in a variety of chemical and industrial applications. As a consequence, a detailed knowledge of the structure-properties correlations is of uttermost importance. Although supercritical water was considered as a homogeneous fluid ...

Nature Research2019

Film Morphology Effect on VOC Sensor Performance Fabricated by Drop-On-Demand Inkjet-Printing

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

This paper presents a sensor for detecting volatile organic compounds with an inkjet-printed composite. The sensing material is composed of polystyrene (35 kg/mol molecular weight) and a high structure carbon black, Ketjenblack EC-600JD. We used a dual-sol ...

IEEE2019

All-printed low-power metal oxide gas sensors on polymeric substrates

Danick Briand, Saleem Khan

This paper presents a novel approach for the fabrication of miniaturized and fully printed metal-oxide (MOX) gas sensors on a polyimide (PI) substrate by using digital manufacturing of the functional layers, namely aerosol jet and inkjet printing technolog ...

IOP PUBLISHING LTD2019

Universal Oxide Shell Growth Enables in Situ Structural Studies of Perovskite Nanocrystals during the Anion Exchange Reaction

Raffaella Buonsanti, Anna Loiudice, Seryio Saris, Michal Stanislaw Strach

The ability to tune thin oxide coatings by wet-chemistry is desirable for many applications, yet it remains a key synthetic challenge. In this work, we introduce a general colloidal atomic layer deposition (c-ALD) synthesis to grow an alumina shell with tu ...

AMER CHEMICAL SOC2019

Stable Ultraconcentrated and Ultradilute Colloids of CsPbX3 (X = Cl, Br) Nanocrystals Using Natural Lecithin as a Capping Ligand

Francesco Stellacci, Quy Ong Khac

Attaining thermodynamic stability of colloids in a broad range of concentrations has long been a major thrust in the field of colloidal ligand-capped semiconductor nanocrystals (NCs). This challenge is particularly pressing for the novel NCs of cesium lead ...

AMER CHEMICAL SOC2019

Page 2 sur 3