Recherche

Afficher tous les résultats pour

Accueil

Publication

UV-curable epoxy primer for adhesion between metallic oxides and thermoplastic polyurethane

Publications associées (30)

À propos
Confidentialité
Mentions légales

Graph Chatbot

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Dielectric properties of 3-3 flexible composites by infiltration of elastomers into porous ceramic structures using cellulose scaffold

Frank Nüesch, Thomas Geiger

Elastomer composites are prepared by infiltrating polydimethylsiloxane (PDMS) into a porous ceramic structure of nanoparticles. This method differs from the conventional approach, where particles are dispersed into the polymer matrix, since here, the polym ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Transient Elastomers with High Dielectric Permittivity for Actuators, Sensors, and Beyond

Holger Frauenrath, Yauhen Sheima

Dielectric elastomers (DEs) are key materials in actuators, sensors, energy harvesters, and stretchable electronics. These devices find applications in important emerging fields such as personalized medicine, renewable energy, and soft robotics. However, e ...

AMER CHEMICAL SOC2022

Enhancement of Pressure-Sensitive Adhesive by CO2 Laser Treatment

Dario Floreano, Yegor Piskarev, Jun Shintake, Vivek Ramachandran, Michael Dickey, Jianhang Yang

Pressure-sensitive adhesives (PSAs) are polymeric films that can be adhered to and detached from surfaces without leaving residue. Researchers are looking to enhance the bond strength between PSAs and different substrates. It can be achieved by tuning PSA' ...

2022

Hydro-processing of biomass using novel metal-organic framework (MOF)/polymer composite catalysts

Vikram Vinayak Karve

Generating value, in the form of functional chemicals, from biomass is a critical need of today. It is expected that replacing petroleum with biomass as the source of many commodity and fine chemicals can lead the transition away from a fossil-fuel based e ...

EPFL2022

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

Nicolas Candau, Adrien Julien Demongeot, Oguzhan Oguz

An amorphous poly(urethane-urea) copolymer composed of 70 wt% poly(ethylene oxide) (PEO) soft segments (SS) (Mw = 2000 g mol−1) and 30 wt% cycloaliphatic hard segments (HS) was subjected to in-situ X-Rays during tensile deformation. Mechanical hardening at ...

2021

Reversible and Broad-Range Oxygen Sensing Based on Purely Organic Long-Lived Photoemitters

Esther Amstad, René M. Rossi, Efe Armagan

The detection of oxygen (O-2) by optical sensors is of growing importance, for example, in biology, life science, environmental science, and aerodynamics, where the composition of gases is crucial for many applications. Purely organic optical O-2 sensors a ...

2021

From vesicles to materials: bioinspired strategies for fabricating hierarchically structured soft matter

Esther Amstad

Certain organisms including species of mollusks, polychaetes, onychophorans and arthropods produce exceptional polymeric materials outside their bodies under ambient conditions using concentrated fluid protein precursors. While much is understood about the ...

ROYAL SOC2021

Semiaromatic polyamides with enhanced charge carrier mobility

John Christopher Plummer, Holger Frauenrath, Nicolas Candau

The control of local order in polymer semiconductors using non-covalent interactions may be used to engineer materials with interesting combinations of mechanical and optoelectronic properties. To investigate the possibility of preparing n-type polymer sem ...

ROYAL SOC CHEMISTRY2021

Composite material

Véronique Michaud, Amaël Maximilien Cohades

In a composite material (6), comprising a fibrous reinforcement (3), and a polymer matrix (14), wherein the polymer matrix (14) comprises two interpenetrating phases, namely a thermoset phase and a continuous thermoplastic phase, wherein the thermoset phas ...

2020

Page 2 sur 3

Dielectric properties of 3-3 flexible composites by infiltration of elastomers into porous ceramic structures using cellulose scaffold

Frank Nüesch, Thomas Geiger

PERGAMON-ELSEVIER SCIENCE LTD2022

Transient Elastomers with High Dielectric Permittivity for Actuators, Sensors, and Beyond

Holger Frauenrath, Yauhen Sheima

AMER CHEMICAL SOC2022

Enhancement of Pressure-Sensitive Adhesive by CO2 Laser Treatment

Dario Floreano, Yegor Piskarev, Jun Shintake, Vivek Ramachandran, Michael Dickey, Jianhang Yang

2022

Mechanical reinforcement and memory effect of strain-induced soft segment crystals in thermoplastic polyurethane-urea elastomers

Nicolas Candau, Adrien Julien Demongeot, Oguzhan Oguz

2021