Publications associées à Off-axis low coherence interferometry contouring

Emergence of highly coherent two-level systems in a noisy and dense quantum network

Quantum sensors and qubits are usually two-level systems (TLS), the quantum analogues of classical bits assuming binary values 0 or 1. They are useful to the extent to which superpositions of 0 and 1 persist despite a noisy environment. The standard prescr ...

Nature Portfolio2024

Terahertz waveform synthesis in integrated thin-film lithium niobate platform

Ileana-Cristina Benea-Chelmus, Jérôme Faist, Francesca Fabiana Settembrini

Bridging the "terahertz gap" relies upon synthesizing arbitrary waveforms in the terahertz domain enabling applications that require both narrow band sources for sensing and few-cycle drives for classical and quantum objects. However, realization of custom ...

Nature Portfolio2023

Resonators with tailored optical path by cascaded-mode conversions

Ileana-Cristina Benea-Chelmus, Marco Piccardo

Optical resonators enable the generation, manipulation, and storage of electromagnetic waves. The physics underlying their operation is determined by the interference of electromagnetic waves, giving rise to the resonance spectrum. This mechanism causes th ...

Nature Portfolio2023

The quantum future of microscopy: Wave function engineering of electrons, ions, and nuclei

Fabrizio Carbone, Ivan Madan, Thomas La Grange, Giovanni Maria Vanacore, Simone Gargiulo

The ability to manipulate particles has always been a fundamental aspect for developing and improving scattering and microscopytechniques used for material investigations. So far, microscopy applications have mostly relied on a classical treatment of the e ...

AIP American Institute of Physics2020

Three-dimensional wind-turbine wake characterization via tomographic particle-image velocimetry

Fernando Porté Agel, Arslan Salim Dar

Wind turbines are often sited on different topographical features. In the current work, we performed wind-tunnel measurements of the wake behind a single wind turbine sited on two escarpments differing in the windward side shape using tomographic particle- ...

IOP Publishing2020

Massively parallel coherent laser ranging using a soliton microcomb

Tobias Kippenberg, Junqiu Liu, Maxim Karpov, Erwan Guillaume Albert Lucas, Wenle Weng, Anton Lukashchuk

Coherent ranging, also known as frequency-modulated continuous-wave (FMCW) laser-based light detection and ranging (lidar)(1) is used for long-range three-dimensional distance and velocimetry in autonomous driving(2,3). FMCW lidar maps distance to frequenc ...

NATURE PUBLISHING GROUP2020

Spatial coherence properties of an LED-based illumination system for mask-aligner lithography

Hans Peter Herzig, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

A high-power LED-based illumination system has been developed as a replacement for the mercury arc lamps used in mask-aligner lithography. LEDs are arranged in a grid array and placed in the entrance aperture of individual reflectors. Those reflectors decr ...

SPIE2019

Holographic imaging of electromagnetic fields via electron-light quantum interference

Fabrizio Carbone, Ivan Madan, Giovanni Maria Vanacore, Enrico Pomarico, Gabriele Berruto, Tatiana Latychevskaia, Tom Theodorus Antonius Lummen

Holography relies on the interference between a known reference and a signal of interest to reconstruct both the amplitude and the phase of that signal. With electrons, the extension of holography to the ultrafast time domain remains a challenge, although ...

American Association for the Advancement of Science (AAAS)2019

An optical-frequency synthesizer using integrated photonics

Tobias Kippenberg, Nicolas Volet, Martin Hubert Peter Pfeiffer

Optical-frequency synthesizers, which generate frequency-stable light from a single microwave-frequency reference, are revolutionizing ultrafast science and metrology, but their size, power requirement and cost need to be reduced if they are to be more wid ...

2018

High power ultraviolet LED illumination systems: coherence properties and applications in photolithography

Johana Bernasconi

Mask-aligner photolithography is a technology used to replicate patterns from a mask to a photosensitive substrate. It is widely used in the fabrication of MEMS and micro-optical components, and for other applications with dimensions in the micrometer rang ...

EPFL2018