Experimental validation of radial reconstructed pin-power distributions in full-scale BWR fuel assemblies with and without control blade

Publications associées (31)

Page 2 sur 4

À propos
Confidentialité
Mentions légales

Graph Chatbot

Full-discharge simulation and optimization with the RAPTOR code, from present tokamaks to ITER and DEMO

Simon Van Mulders

Tokamak devices aim to magnetically confine a hydrogen plasma at sufficiently high pressure to achieve net energy production from nuclear fusion of light isotopes. Predictive modeling and optimization is crucial for reliable operation of tokamak reactors, ...

EPFL2023

Extension of the OFFBEAT fuel performance code to finite strains and validation against LOCA experiments

Andreas Pautz, Carlo Fiorina, Alessandro Scolaro, Edoardo Luciano Brunetto

The mechanical analysis of nuclear fuel behavior under base-irradiation conditions has traditionally been performed adopting the small-strain approximation. However, many cases of interest for fuel behavior involve the occurrence of large rod deformations ...

ELSEVIER SCIENCE SA2023

Electromagnetic processes of nuclear excitation: from direct photoabsorption to free electron and muon capture

Simone Gargiulo

In the vast expanse of the Universe and on our planet, nuclei exist in a state of excitement. These excited nuclear states (isomers) can persist for varying periods, from fractions of a second to billions of years and beyond, before decaying to their groun ...

EPFL2023

Delayed Hydride Cracking in Irradiated and Unirradiated Zircaloy-2 Cladding

Aaron William Colldeweih

Zirconium alloys used in the nuclear industry are exposed to extreme conditions undergoing high levels of irradiation damage and corrosion. Zircaloy-2 is used as nuclear fuel cladding in boiling water reactors and for the encapsulation of the spallation ta ...

EPFL2022

High accuracy measurement of the prompt neutron decay constant in CROCUS using Gamma Noise and bootstrapped uncertainties

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari, Pavel Frajtag, Tom Mager

We experimentally demonstrate the advantages of gamma detection for noise measurements to deter-mine the prompt neutron decay constant a of a nuclear reactor using the power spectral density (PSD) method, coupled to a new uncertainty estimation scheme base ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Advanced methodologies for modeling and assessment of SFR safety functions

Janos Bodi

The present doctoral work was performed to contribute to the conceptual design development and safety assessment of a Generation IV Sodium Fast Reactor (SFR) in the frame of the European Sodium Fast Reactor Safety Measures Assessment and Research Tools (ES ...

EPFL2022

Miniature and Minimalistic Neutron Detectors for Online High-Resolution Experiments in the Zero-Power Reactor CROCUS

Fanny Vitullo

The continuous strive for more efficient and reliable nuclear power plants is leading to increasing complexity in the design and operations of reactors. As a consequence, comprehensive analyses are required to assess the reactor's safety during normal and ...

EPFL2022

Multi-physics modeling of VVERs with high fidelity high-resolution codes

Marianna Papadionysiou

The calculations performed for the design and operation of a Nuclear Power Plant (NPP) are a key factor for their safety analyses. The standard for the computational analysis of NPPs is the so called conventional approach, which relies on coarse mesh diffu ...

EPFL2022

Investigation and Validation of Unstructured Mesh Methodologies for Modeling Experimental Reactors

Andreas Pautz, Mathieu Hursin, Carlo Fiorina, Tom Mager

This paper summarizes a methodology developed at Ecole Polytechnique Federale de Lausanne for the neutronic modeling of the CROCUS experimental reactor and proposes solutions to the challenges one may face while modeling a research reactor with a complex g ...

MDPI2022

Data-Driven Predictive Models: Calculational Bias in Characterization of Spent Nuclear Fuel

Characteristics of the spent nuclear fuel (SNF) are typically calculated, requiring validation a priori. The validation process relies on the difference between calculations and measurements, namely the bias. Usually, predicting the bias based on benchmark ...

EPFL2022

Page 2 sur 4

High accuracy measurement of the prompt neutron decay constant in CROCUS using Gamma Noise and bootstrapped uncertainties

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari, Pavel Frajtag, Tom Mager

PERGAMON-ELSEVIER SCIENCE LTD2022