Publications associées à Report of RILEM TC 267-TRM: Improvement and robustness study of lime mortar strength test for assessing reactivity of SCMs

Pre-bcc: A novel integrated machine learning framework for predicting mechanical and durability properties of blended cement concrete

Partially replacing ordinary Portland cement (OPC) with low-carbon supplementary cementitious materials (SCMs) in blended cement concrete (BCC) is perceived as the most promising route for sustainable concrete production. Despite having a lower environment ...

ELSEVIER SCI LTD2022

Resistance of cementitious materials to sulfate attack: quantifying performance with a reliable unidirectional approach

Qiao Wang

Depending on the environmental conditions, concrete materials can come into contact with sulfate ions which are widely present in rivers, underground water, sewers, seawater and soil. Sulfates can react with the cement paste in concrete and cause damage wh ...

EPFL2022

ECO2 framework assessment of limestone powder concrete slabs and columns

Hisham Tarek Mohamed Hafez

Producing limestone powder requires comparably far less energy than the production of ordinary Portland cement (OPC), making it a promising sustainable solution for partial replacement of OPC in concrete. Lower production energy could be translated into lo ...

ELSEVIER2022

Nanoscale modelling of ionic transport in the porous C-S-H network

Khalil Ferjaoui

To reduce the CO2 footprint of construction materials, concrete producers blend their cement with Supplementary Cementitious Materials (SCMs). SCMs such as fly ash or blast furnace slag are mostly the byproducts of other industries. And while SCMs are chos ...

EPFL2022

Reactive dicalcium silicate binders: Microstructure and transport properties

Adrian-Alexandru Pîrvan

The calcium silicate hydrates (C-S-H) are without doubt one of the most important hydration products in a hardened cement paste. Giving the complexity of the microstructure that forms by hydration of ordinary Portland cement (OPC) and the more recently use ...

EPFL2022

Microstructural developments of limestone calcined clay cement (LC3) pastes after long-term (3 years) hydration

Karen Scrivener, Franco Alberto Zunino Sommariva

LC3 is one of the most promising alternatives for a high-performance blended cement with a significantly lower clinker content and with potential for worldwide adoption. For this reason, understanding its long-term performance is relevant to ensure service ...

Pergamon-Elsevier Science Ltd2022

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet, Anuj Parashar, Yuvaraj Dhandapani, Sreejith Krishnan

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...

SPRINGER2022

Oxidation of pyrite (FeS2) and troilite (FeS) impurities in kaolinitic clays after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva

Valorisation of locally available clays for producing blended cements is crucial for a widespread adoption of sustainable binders incorporating these materials. In some places, clays can be intermixed with small amounts of iron sulfides, which could eventu ...

SPRINGER2022

The Challenge of Grinding Ternary Blends Containing Calcined Clays and Limestone

Karen Scrivener, Franco Alberto Zunino Sommariva, Juan Alberto Ribalta Quesada

The inclusion of high specific surface materials such as calcined clays in cementitious systems enhances the hydration of clinker products at very early ages, but it may also increase water demand; thus, the pursuit of a flowing concrete may demand an incr ...

MDPI2022

Hydration and durability of fast hardening binders incorporating supplementary cementitious materials

Sarra El Housseini

The use of supplementary cementitious materials (SCMs) is widely considered the most promis-ing approach to reduce CO2 emissions relative to cement production. SCMs are not commonly present in binders used for special applications. On the other hand, due t ...

EPFL2022