Predictive Models for Thermal Behavior of Chemicals with Quantitative Structure-Property Relationships

Publications associées (31)

Thermochromic solar absorber coatings with elevated transition temperature

Due to their simple design and operation, solar thermal collectors for domestic hot water gener-ation and space heating are one of the most common solar energy harvesting systems in use today. Dur-ing cold periods all the absorbed energy is useful. During ...

EPFL2020

Page 3 sur 4

À propos
Confidentialité
Mentions légales

Graph Chatbot

Evaporation of Metals during the Thermal Treatment of Oxide Nanomaterials in Cellulose-Based Matrices

Christian Ludwig, Mohamed Tarik

Like conventional material products, waste is the last stage of the life cycle of engineered nanomaterials, which are then incinerated or stabilized before disposal. However, because of their special physical characteristics, the fate of the thermally trea ...

2020

Reusability of filtering facepiece respirators after decontamination through drying and germicidal UV irradiation

Véronique Michaud, David Vernez, Guillaume Suarez, Kiattisak Batsungnoen

Introduction During pandemics, such as the SARS-CoV-2, filtering facepiece respirators plays an essential role in protecting healthcare personnel. The recycling of respirators is possible in case of critical shortage, but it raises the question of the effe ...

2020

Thermochromic solar absorber coatings with elevated transition temperature

Anna Krammer

EPFL2020

One-dimensional facile growth of MAPbI(3) perovskite micro-rods

Mohammad Khaja Nazeeruddin, Zubair Ahmad

One-dimensional microrods (4-5 mm) of PbI2 and CH3NH3PbI3 (MAPbI(3)) with unique structural and morphological properties have been grown at room temperature. X-ray diffraction (XRD) patterns of both types of micro-rods exhibit a hexagonal system (P3m1(164) ...

2019

Effect of surface modification of colloidal silica nanoparticles on the rigid amorphous fraction and mechanical properties of amorphous polyurethane-urea-silica nanocomposites

John Christopher Plummer, Nicolas Candau, Oguzhan Oguz, Stéphane Henri Florian Bernhard

Colloidal silica nanoparticles (NPs) modified with eight different silane coupling agents were incorporated into an amorphous poly(tetramethylene oxide)-based polyurethane-urea copolymer matrix at a concentration of 10 wt % (4.4 vol %) in order to investig ...

2019

Preparation of high-conductivity, high-capacity phase change media capsules with enhanced thermos-chemical stability in thermal energy storage applications

Selmar Rudolf Binder

Thermal energy storage using the effects of the latent heat in the solid-liquid phase transformation has found its way into every day applications. Reusable, organic phase change media stabilize low temperatures of parcels, and salt/water tanks act as buff ...

EPFL2019

Effect of annealing temperature on the performance of printable carbon electrodes for perovskite solar cells

Mohammad Khaja Nazeeruddin, Iwan Zimmermann, Zubair Ahmad

Perovskite solar cells (PSCs) with mesoporous TiO2 electron transport layers have reached > 22% efficiency at laboratory scale ( < 1 cm(2)), however, these layers are fabricated using spin-coating, which is not conducive to large-scale or high throughput f ...

ELSEVIER SCIENCE BV2019

Rapid, Robust, and Relevant (R3) Reactivity Test for Supplementary Cementitious Materials

Karen Scrivener, Ruben Anton Snellings, François Henri Avet, Xuerun Li

Although supplementary cementitious materials (SCMs) are now commonly accepted and widely used, consensus has not been reached for methods to test their chemical reactivity. A multitude of test methods exist but often fall short on one or more of the key f ...

AMER CONCRETE INST2019

A coarse-mesh methodology for modelling of single-phase thermal-hydraulics of ESFR innovative assembly design

Andreas Pautz, Konstantin Mikityuk, Carlo Fiorina, Stefan Radman

The GeN-Foam multi-physics code enables coupled thermal-hydraulic, neutronic, and thermal-mechanical analysis of fast reactor cores with 3-D unstructured deformable meshes. Advances within the Horizon2020 ESFR-SMART project, as well as trends towards highe ...

ELSEVIER SCIENCE SA2019

One-Pot Synthesis of 1-[(Triisopropylsilyl)ethynyl]-1,2-benziodoxol-3(1H)-one (TIPS-EBX): Process Safety Assessment and Impact of Impurities on Product Stability

Jérôme Waser, Stefano Nicolai, Durga Prasada Rao Hari, Miyeon Chang, Paola Caramenti, Lionel Schouwey

The hypervalent iodine reagent 1-[(TriIsoPropylSilyl)Ethynyl]-1,2-BenziodoXol-3(1H)-one (TIPS-EBX) is among the most useful electrophilic and somophilic alkynylation reagents. Herein, we report a new synthetic protocol to access this reagent in one step fr ...

2019

Page 3 sur 4