Publication

Low temperature crystalline titanium dioxide by atomic layer deposition for dye-sensitized solar cells

Publications associées (29)

Identification and Mitigation of Degradation Mechanisms Induced by Heat and Light in NiOx-based Perovskite Solar Cells

Perovskite solar cells (PSCs) offer an attractive solution to increase the efficiency of PV panels via perovskite/silicon tandems thanks to their potential cost-effectiveness and high efficiency. In inverted PSC architecture (p-i-n), commonly used hole con ...

EPFL2024

Photo-doping of spiro-OMeTAD for highly stable and efficient perovskite solar cells

Michael Graetzel, Jacques-Edouard Moser, Kai Zhu, Etienne Christophe Socie, George Cameron Fish, Aaron Tomas Terpstra

A widely used component of high-efficiency perovskite solar cells (PSCs) is the molecular hole-transport material (HTM) spiro-OMeTAD. This organic solid needs to be p-doped to acquire sufficient hole conductivity. However, the conventional doping method us ...

2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

A thermotropic liquid crystal enables efficient and stable perovskite solar modules

Mohammad Khaja Nazeeruddin, Yong Ding, Bin Ding, Cheng Liu, Jian Xu

Perovskite solar cells have seen impressive progress in performance and stability, yet maintaining efficiency while scaling area remains a challenge. Here we find that additives commonly used to passivate large-area perovskite films often co-precipitate du ...

Nature Portfolio2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Computational Studies on the Stability of Organic-Inorganic Hybrid Halide Lead Perovskites

Mathias Dankl

Perovskite-based solar cells are currently the most rapidly advancing photovoltaic technology but concerns about their long-term stability are still impeding full-scale commercialization. This thesis provides computational insights into some of the stabili ...

EPFL2024

Machine Learning for Screening Small Molecules as Passivation Materials for Enhanced Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Bin Ding, Xianfu Zhang, Bo Chen, Chaohui Li, Yan Liu

Utilization of small molecules as passivation materials for perovskite solar cells (PSCs) has gained significant attention recently, with hundreds of small molecules demonstrating passivation effects. In this study, a high-accuracy machine learning model i ...

Wiley-VCH Verlag Gmbh2024

Enhanced performance of perovskite solar cell via up-conversion YLiF4:Yb, Er nanoparticles

Mounir Driss Mensi, Masaud Hassan S Almalki, Anwar Qasem M Alanazi

We report a simple and effective method for producing lanthanide ion-doped lithium-fluoride-based nanocrystals (YLiF4). We utilized those nanoparticles for up-conversion in fabricated perovskite solar cells. The obtained results shows that the up-conversio ...

Elsevier2024

Correlating long-term performance and aging behaviour of building integrated PV modules

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Ebrar Özkalay

Because building-integrated photovoltaic (BIPV) modules are fully integrated into a building envelope, the back of the module can be exposed to little or no ventilation, resulting in increased operating temperatures. As the temperature increases, the perfo ...

Elsevier Science Sa2024

Axial-Equatorial Halide Ordering in Layered Hybrid Perovskites from Isotropic-Anisotropic 207Pb NMR

David Lyndon Emsley, Ümmügülsüm Günes, Michael Allan Hope, Manuel Cordova, Aditya Mishra

Bandgap-tuneable mixed-halide 3D perovskites are of interest for multi-junction solar cells, but suffer from photoinduced spatial halide segregation. Mixed-halide 2D perovskites are more resistant to halide segregation and are promising coatings for 3D per ...

Wiley-VCH Verlag GmbH2024