Publication

Ion cyclotron resonance heating scenarios for DEMO

Publications associées (31)

Innovative dud detection based on JET DT experience

DT operations at JET gave a unique and invaluable opportunity to design, develop and test real -time controllers that will be applied in future burning plasma devices, as ITER and SPARC. Among them, the dud detector [L. Piron et al. 2019 Fusion Eng. Design ...

Elsevier Science Sa2024

First-principle based predictions of the effects of negative triangularity on DTT scenarios

Olivier Sauter, Gabriele Merlo, Alberto Mariani

Plasmas with negative triangularity (NT) shape have been recently shown to be able to achieve H-mode levels of confinement in L-mode, avoiding detrimental edge localised modes. Therefore, this plasma geometry is now studied as a possible viable option for ...

IOP Publishing Ltd2024

Full-F turbulent simulation in a linear plasma device using a gyro-moment approach

Paolo Ricci, Baptiste Jimmy Frei

Simulations of plasma turbulence in a linear plasma device configuration are presented. These simulations are based on a simplified version of the gyrokinetic (GK) model proposed by Frei et al. [J. Plasma Phys. 86, 905860205 (2020)], where the full-F distr ...

Aip Publishing2024

Interpretative 3D MHD modelling of deuterium SPI into a JET H-mode plasma

Cristian Sommariva, Umar Sheikh, Mengdi Kong, Haomin Sun

The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( D 2 ) shattered pellet injection (SPI) into a 3 MA / 7 MJ JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evo ...

IOP Publishing Ltd2024

Impact of microwave beam scattering by density fluctuations on the electron-cyclotron power deposition profile in tokamaks

Stefano Coda, Joan Decker, Oleg Krutkin, Umesh Kumar, Jean Arthur Cazabonne

Electron-cyclotron waves are a tool commonly used in tokamaks, in particular to drive current. Their ability to drive current in a very localized manner renders them an optimal tool for MHD mode mitigation. However, such applications require high accuracy ...

IOP Publishing Ltd2024

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Rainer Wesche, Roberto Guarino, Frédéric Michel

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

2024

Design Progress of Structural Components of the EU DEMO EC Equatorial Launcher

René Chavan, Jean-Philippe Hogge

The EU DEMO Tokamak is foreseen to be equipped with an electron cyclotron (EC) system for plasma heating, magnetohydrodynamic (MHD) control, and thermal instability suppression. Up to six launchers will be installed into equatorial ports with the aim to in ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Scenario optimization for the tokamak ramp-down phase in RAPTOR: A. Analysis and model validation on ASDEX Upgrade

Olivier Sauter, Federico Alberto Alfredo Felici, Simon Van Mulders, Cassandre Ekta Contré, Anna Teplukhina, Bernhard Sieglin

We discuss how the combination of experimental observations and rapid modeling has enabled to improve understanding of the tokamak ramp-down phase in ASDEX Upgrade. A series of dedicated experiments has been performed, to disentangle the effect of individu ...

Iop Publishing Ltd2024

Comparison of reduced model predictions for divertor detachment onset and reattachment timescales in ASDEX Upgrade and JET experiments

Holger Reimerdes, Haomin Sun

Building on prior analysis of ASDEX Upgrade (AUG) experiments (Henderson et al 2023 Nucl. Fusion 63 086024), this study compares simple analytical formula predictions for divertor detachment onset and reattachment timescales in JET experiments. Detachment ...

IOP Publishing Ltd2024

Maintenance and optimization of the TCV power supply

Damien Fasel, Ugo Siravo, Jérémie Dubray

The TCV tokamak is powered by a flywheel generator to supply the magnetic coils and the auxiliary heating systems. The generator has just undergone its fourth major overhaul to make it ready for the next ten years, after more than thirty years of almost tr ...

Elsevier Science Sa2024