Clay Reactivity: Kaolinite Content and LC3 Technology

This lecture explores the importance of kaolinite content in clay reactivity for LC3 technology, highlighting its correlation with compressive strength. It discusses the dehydroxylation of clay minerals, the reactivity of different clays, and the significance of metakaolin. The assessment methods for clay suitability, including thermal analysis and practical weight loss measurements, are also covered. The lecture emphasizes the chemical composition requirements for good reactivity and the factors influencing clay suitability. It concludes with a summary underscoring the crucial role of kaolinite in determining clay reactivity and hints at the upcoming discussion on clay activation.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts (33)

Cement Chemistry and Sustainable Cementitious Materials

Learn the basics of cement chemistry and laboratory best practices for assessment of its key properties.

Kaolinite

Kaolinite (ˈkeɪ.ələˌnaɪt,_-lɪ- ) is a clay mineral, with the chemical composition Al2Si2O5(OH)4. It is a layered silicate mineral, with one tetrahedral sheet of silica () linked through oxygen atoms to one octahedral sheet of alumina () octahedra. Kaolinite is a soft, earthy, usually white, mineral (dioctahedral phyllosilicate clay), produced by the chemical weathering of aluminium silicate minerals like feldspar. It has a low shrink–swell capacity and a low cation-exchange capacity (1–15 meq/100 g).

Thermal analysis

Thermal analysis is a branch of materials science where the properties of materials are studied as they change with temperature.

Compressive strength

In mechanics, compressive strength (or compression strength) is the capacity of a material or structure to withstand loads tending to reduce size (as opposed to tensile strength which withstands loads tending to elongate). In other words, compressive strength resists compression (being pushed together), whereas tensile strength resists tension (being pulled apart). In the study of strength of materials, tensile strength, compressive strength, and shear strength can be analyzed independently.

Calcination

Calcination refers to thermal treatment of a solid chemical compound (e.g. mixed carbonate ores) whereby the compound is raised to high temperature without melting under restricted supply of ambient oxygen (i.e. gaseous O2 fraction of air), generally for the purpose of removing impurities or volatile substances and/or to incur thermal decomposition. The root of the word calcination refers to its most prominent use, which is to remove carbon from limestone (calcium carbonate) through combustion to yield calcium oxide (quicklime).

Thermogravimetric analysis

Thermogravimetric analysis or thermal gravimetric analysis (TGA) is a method of thermal analysis in which the mass of a sample is measured over time as the temperature changes. This measurement provides information about physical phenomena, such as phase transitions, absorption, adsorption and desorption; as well as chemical phenomena including chemisorptions, thermal decomposition, and solid-gas reactions (e.g., oxidation or reduction). Thermogravimetric analysis (TGA) is conducted on an instrument referred to as a thermogravimetric analyzer.