Publication

Influence of geometrical imperfections and flaws at welds of steel liners on fatigue behavior of pressure tunnels and shafts in anisotropic rock

Abstract

High-head steel lined pressure tunnels and shafts may be considered as critical infrastructures especially when rock overburden is small. In the case of lining failure, catastrophic damages can occur when a large amount of water can reach the steep valley slopes and induce dangerous mud and debris flow. In the last decades, high-strength steel has been used more frequently for such high-head pressure tunnels and shafts mainly for economic and construction reasons. Under the more and more rough operation conditions of storage hydropower plants, high-strength steels, which are generally thinner than lower grade steels, are more prone to fail by fatigue. Design guidelines for the application of high-strength steel for steel liners are still missing. With his research project, Dr Alexandre Pachoud made an important and novel contribution for the design of pressure tunnels and shafts considering the influence of anisotropic behavior of rock as well as the geometrical imperfections and flaws at welds on the fatigue resistance of the steel liners. For the first time, Dr Pachoud studied systematically the influence of rock anisotropy on the deformation of the lining system comprising steel liner, backfill concrete and near as well as far field rock mass. He performed an extensive parametric study with the finite element method (FEM) over a wide range of geometrical and material parameters. Normalized stresses and displacements were analyzed in the steel liner and the far-field rock mass and correction factors to be included in the analytical solution for isotropic rock conditions could be derived. For transversely anisotropic rock mass the analytical solution allows a simple and fast estimation of the maximum stresses in the steel liner by a correction applied to the isotropic analytical solution with a high accuracy. Based on extensive FEM simulations Dr Pachoud derived in a further step parametric correction factors, which allow estimating stress concentrations and structural stresses in steel liners considering geometrical imperfections. Dr Pachoud obtained also Stress Intensity Factors (SIF) for axial cracks in the weld material of the longitudinal joints by means of computational Linear Elastic Fracture Mechanics (LEFM) and could propose new parametric equations for the weld shape correction. For fatigue assessment, a probabilistic model for steel liner crack growth and fracture was developed by using the above mentioned new parametric equations for considering geometrical imperfections. Finally, Dr Pachoud illustrated the implementation of all the developed parametric equations in a probabilistic model for crack growth in the steel liner under dynamic loading with a case study for a high-head power plant. The probabilistic model allows determining the acceptable undetected initial crack sizes in the steel liner depending on the choice of the steel grade, which is crucial for engineering practice using high-strength steels for pressure tunnels and shafts.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (41)
Carbon steel
Carbon steel is a steel with carbon content from about 0.05 up to 2.1 percent by weight. The definition of carbon steel from the American Iron and Steel Institute (AISI) states: no minimum content is specified or required for chromium, cobalt, molybdenum, nickel, niobium, titanium, tungsten, vanadium, zirconium, or any other element to be added to obtain a desired alloying effect; the specified minimum for copper does not exceed 0.40%; or the specified maximum for any of the following elements does not exceed the percentages noted: manganese 1.
Stainless steel
Stainless steel, also known as inox or corrosion-resistant steel (CRES), is an alloy of iron that is resistant to rusting and corrosion. It contains at least 10.5% chromium and usually nickel, and may also contain other elements, such as carbon, to obtain the desired properties. Stainless steel's resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen. The alloy's properties, such as luster and resistance to corrosion, are useful in many applications.
Steel
Steel is an alloy of iron and carbon with improved strength and fracture resistance compared to other forms of iron. Many other elements may be present or added. Stainless steels, which are resistant to corrosion and oxidation, typically need an additional 11% chromium. Because of its high tensile strength and low cost, steel is used in buildings, infrastructure, tools, ships, trains, cars, bicycles, machines, electrical appliances, furniture, and weapons. Iron is the base metal of steel.
Show more
Related publications (95)

Experimental Evaluation and Modeling of Residual Stress Distributions for Hot-Rolled Wide Flange Steel Members

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Andronikos Skiadopoulos

Local and member instability modes in structural steel members are influenced by initial geometric imperfections and residual stresses among other parameters. The robustness of stability-related design provisions and finite element modeling procedures of s ...
2023

Multi-scale modeling of aggregate interlock phenomena in concrete

Mohit Pundir

In concrete structures, opened cracks contribute significantly to the transfer of shear and normal stresses through the contact forces occurring between fractured surfaces. Such contact forces are due to protruding asperities, engaged by interlocking and f ...
EPFL2021

Coupling between cohesive element method and Node-to-segment contact algorithm : Implementation and application

Guillaume Anciaux, Mohit Pundir

In materials, the evolution of crack surfaces is intimately linked with the self-contact occuring between them. The developed contact forces not only mitigate the effect of stress concentration at crack tip but also contribute significantly to the transfer ...
2021
Show more
Related MOOCs (3)
The Art of Structures I - Cables and arcs
L'art des structures propose une découverte du fonctionnement des structures porteuses, telles que les bâtiments, les toitures ou les ponts. Ce cours présente les principes du dimensionnement et les s
The Art of Structures I - Cables and arcs
Ce cours présente les principes du fonctionnement, du dimensionnement et de la conception des structures. L'approche est basée sur une utilisation de la statique graphique et traite en particulier des
Advanced Timber Plate Structural Design
A trans-disciplinary approach in structural design and digital architecture of timber structures with advanced manufacturing workflow.

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.