Publication

Effective conductivity of porous ceramics in a radiative environment

Abstract

The knowledge of the effective thermal conductivity, taking into account conduction and radiation, is crucial for the accurate prediction of the thermal behavior of porous foams, especially in an environment where radiation is dominating. We present a combined experimental-numerical method for the quantification of the temperature- dependent effective thermal conductivity of porous ceramics. The experiments include transient and spatially-resolved temperature measurements of ceramic foam samples with porosities between 75% and 92%, exposed to high radiative fluxes (peak of 1500kW/m2). Maximum surface temperatures of 1900K for high purity alumina samples and of 1500K for alumino-silicate (AS) samples were measured, and nonlinear temperature profiles through the sample along the main temperature gradient direction were measured. A 3D numerical model based on an OpenFOAM toolbox was developed and used to determine the thermal conductivity, using the experimental temperature measurements as input. We quantified the effective thermal conductivities (ETCs) in a temperature range of 288K–1473K and showed that the ETC of AS samples can significantly increase in the presence of incoming and internal radiation. Alumina with 2 to 5 times smaller typical pore sizes (80μm vs 190, 230, and 400μm) exhibited an ETC dominated by conduction and relatively unaffected by radiation. This work illustrates that the ETC of porous materials exposed to radiative fluxes do not only depend on material properties or morphology but also on the operational conditions.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (36)
Thermal conductivity
The thermal conductivity of a material is a measure of its ability to conduct heat. It is commonly denoted by , , or . Heat transfer occurs at a lower rate in materials of low thermal conductivity than in materials of high thermal conductivity. For instance, metals typically have high thermal conductivity and are very efficient at conducting heat, while the opposite is true for insulating materials like mineral wool or Styrofoam.
Thermal resistance
Thermal resistance is a heat property and a measurement of a temperature difference by which an object or material resists a heat flow. Thermal resistance is the reciprocal of thermal conductance. (Absolute) thermal resistance R in kelvins per watt (K/W) is a property of a particular component. For example, a characteristic of a heat sink. Specific thermal resistance or thermal resistivity Rλ in kelvin–metres per watt (K⋅m/W), is a material constant.
Electrical resistivity and conductivity
Electrical resistivity (also called volume resistivity or specific electrical resistance) is a fundamental specific property of a material that measures its electrical resistance or how strongly it resists electric current. A low resistivity indicates a material that readily allows electric current. Resistivity is commonly represented by the Greek letter ρ (rho). The SI unit of electrical resistivity is the ohm-metre (Ω⋅m).
Show more
Related publications (53)

Advancing efficiency and reliability in thermal analysis of laser powder-bed fusion

Christian Leinenbach, Rafal Wróbel, Thomas Mayer

In laser based powder-bed fusion of metals (PBF-LB/M), parts are fabricated by melting layers of powder using a high-intensity laser beam. During this process, the material is exposed to rapid cooling rates and intense thermal gradients, which are the unde ...
2023

Thermal conductivity of glasses: first-principles theory and applications

Nicola Marzari, Michele Simoncelli

Predicting the thermal conductivity of glasses from first principles has hitherto been a very complex problem. The established Allen-Feldman and Green-Kubo approaches employ approximations with limited validity-the former neglects anharmonicity, the latter ...
NATURE PORTFOLIO2023

Conductive Heat Transfer in Partially Saturated Gas Diffusion Layers with Evaporative Cooling

Sophia Haussener, Felix N. Büchi, Mirco Magnini

Heat transport is an important, though often neglected function of gas diffusion layers (GDLs) of polymer electrolyte membrane fuel cells. Thermal conductivity is a key property, especially in partially water saturated GDLs and when the phase change of wat ...
2022
Show more
Related MOOCs (18)
Thermodynamics
Ce cours complète le MOOC « Thermodynamique : fondements » qui vous permettra de mettre en application les concepts fondamentaux de la thermodynamique. Pour atteindre cet objectif, le Professeur J.-P
Thermodynamics
Ce cours complète le MOOC « Thermodynamique : fondements » qui vous permettra de mettre en application les concepts fondamentaux de la thermodynamique. Pour atteindre cet objectif, le Professeur J.-P
Micro and Nanofabrication (MEMS)
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.