R2D2: A Region-Based Recursive Doppler Dealiasing Algorithm for Operational Weather Radar

Region-based Recursive Doppler Dealiasing (R2D2) is a novel dealiasing algorithm to unfold Doppler velocity fields obtained by operational radar measurements. It specializes in resolving issues when the magnitude of the gate-to-gate velocity shear approaches or exceeds the Nyquist velocity. This occurs either in highly sheared situations, or when the Nyquist velocity is low. Highly sheared situations, such as convergence lines or mesocyclones, are of particular interest for nowcasting and warnings. R2D2 masks high-shear areas and adds a spatial buffer around them. The areas between the buffers are then identified as continuous regions that lie within the same Nyquist interval. Each region subsequently is assigned its most likely Nyquist interval by applying vertical and temporal continuity constraints, as well as supplemental wind information from an operational mesoscale model. The shear zones are then resolved using 2D continuity in azimuth and range. This 4D procedure is repeated until no further improvement can be achieved. Each iteration with fewer folds identifies fewer but larger continuous regions and less shear zones until an optimum is reached. Residual errors, often related to shear greater than the Nyquist velocity, are contained to small areas within the buffer zones. This approach maximizes operational performance in high-shear situations and restricts errors to minimal areas to mitigate error propagation. © 2020 American Meteorological Society. For information regarding reuse of this content and general copyright information, consult the AMS Copyright Policy (www.ametsoc.org/PUBSReuseLicenses).