Publication

Dataset for 'Printed ecoresorbable temperature sensors for environmental monitoring'

Abstract

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Printed ecoresorbable temperature sensors for environmental monitoring”. This work aims to study the effect of photonic sintering parameters on the temperature behavior of printed zinc resistors, with the aim to fabricate eco-friendly and ecoresorbable temperature sensors on paper. Biodegradable electronic devices have potential in tackling the increasingly pressing challenge of electronic waste and printing methods allow to reduce toxic byproducts of fabrication and wasted material. The sintering method that is optimized here is based on our previous work combining electrochemical and photonic sintering approaches to enable the fabrication of highly-conductive degradable metal tracks. We optimize the sintering parameters to obtain zinc resistors with a high temperature coefficient of resistance and a linear temperature response curve. The data that was collected in the frame of this work is present in this repository. More information about the contents of the dataset is present in the included README files.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (33)
Electronic waste
Electronic waste or e-waste describes discarded electrical or electronic devices. It is also commonly known as waste electrical and electronic equipment (WEEE) or end-of-life (EOL) electronics. Used electronics which are destined for refurbishment, reuse, resale, salvage recycling through material recovery, or disposal are also considered e-waste. Informal processing of e-waste in developing countries can lead to adverse human health effects and environmental pollution.
Waste
Waste (or wastes) are unwanted or unusable materials. Waste is any substance discarded after primary use, or is worthless, defective and of no use. A by-product, by contrast is a joint product of relatively minor economic value. A waste product may become a by-product, joint product or resource through an invention that raises a waste product's value above zero. Examples include municipal solid waste (household trash/refuse), hazardous waste, wastewater (such as sewage, which contains bodily wastes (feces and urine) and surface runoff), radioactive waste, and others.
Ceramic engineering
Ceramic engineering is the science and technology of creating objects from inorganic, non-metallic materials. This is done either by the action of heat, or at lower temperatures using precipitation reactions from high-purity chemical solutions. The term includes the purification of raw materials, the study and production of the chemical compounds concerned, their formation into components and the study of their structure, composition and properties. Ceramic materials may have a crystalline or partly crystalline structure, with long-range order on atomic scale.
Show more
Related publications (37)

Dataset for '3D printing of customizable transient bioelectronics and sensors'

Danick Briand, Nicolas Francis Fumeaux

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “3D printing of customizable transient bioelectronics and sensors”. This work aims to study and demonstrate ...
Zenodo2024

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...
EPFL2023

A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites

Erwan Philippe Guenier

Additive Manufacturing also commonly referred as 3D printing has been given a lot of interest lately. Market is growing exponentially and the aim for obtaining more complex and ready-to use parts is emerging. All the 3D printing processes consist in buildi ...
EPFL2023
Show more
Related MOOCs (4)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
Micro and Nanofabrication (MEMS)
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Microstructure Fabrication Technologies I
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.