Are you an EPFL student looking for a semester project?
Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.
Concept
Flue-gas desulfurization
Summary
Flue-gas desulfurization (FGD) is a set of technologies used to remove sulfur dioxide () from exhaust flue gases of fossil-fuel power plants, and from the emissions of other sulfur oxide emitting processes such as waste incineration, petroleum refineries, cement and lime kilns.
Since stringent environmental regulations limiting emissions have been enacted in many countries, is being removed from flue gases by a variety of methods. Common methods used:
Wet scrubbing using a slurry of alkaline sorbent, usually limestone or lime, or seawater to scrub gases;
Spray-dry scrubbing using similar sorbent slurries;
Wet sulfuric acid process recovering sulfur in the form of commercial quality sulfuric acid;
SNOX Flue gas desulfurization removes sulfur dioxide, nitrogen oxides and particulates from flue gases;
Dry sorbent injection systems that introduce powdered hydrated lime (or other sorbent material) into exhaust ducts to eliminate and from process emissions.
For a typical coal-fired power station, flue-gas desulfurization (FGD) may remove 90 per cent or more of the in the flue gases.
Methods of removing sulfur dioxide from boiler and furnace exhaust gases have been studied for over 150 years. Early ideas for flue gas desulfurization were established in England around 1850.
With the construction of large-scale power plants in England in the 1920s, the problems associated with large volumes of from a single site began to concern the public. The SO2 emissions problem did not receive much attention until 1929, when the House of Lords upheld the claim of a landowner against the Barton Electricity Works of the Manchester Corporation for damages to his land resulting from emissions. Shortly thereafter, a press campaign was launched against the erection of power plants within the confines of London. This outcry led to the imposition of SO2 controls on all such power plants.
The first major FGD unit at a utility was installed in 1931 at Battersea Power Station, owned by London Power Company.
Official source
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.