Concept

Nap (fabric)

Primarily, nap is the raised (fuzzy) surface on certain kinds of cloth, such as velvet or moleskin. Nap can refer additionally to other surfaces that look like the surface of a napped cloth, such as the surface of a felt or beaver hat. Starting around the 14th century, the word referred originally to the roughness of woven cloth before it was sheared. When cloth, especially woollen cloth, is woven, the surface of the cloth is not smooth, and this roughness is the nap. Generally the cloth is then "sheared" to create an even surface, and the nap is thus removed. A person who trimmed the surface of cloth with shears to remove any excess nap was known as a shearman. Nap typically has a direction in which it feels smoothest. In garments, nap direction is often matched across seams, because cloth will not only feel but look different depending on the direction of the nap. For this reason, sewing patterns frequently show the nap direction, or warn that more fabric will be needed if the fabric has a nap. Since the 15th century, the term nap has generally referred to a special pile given to the cloth. The term pile refers to raised fibres that are there on purpose, rather than as a by-product of producing the cloth. In this case, the nap is woven into the cloth, often by weaving loops into the fabric, which can then be cut or left intact. Carpets, rugs, velvet, velour, and velveteen, are made by interlacing a secondary yarn through woven cloth, creating a nap or pile. In the finishing process of manufacturing textiles, after the cloth is woven, it goes through processes such as washing, fulling, raising the nap and trimming the nap. After the nap is trimmed, the fabric is considered finished. The raising process, which draws out the ends of the fibres, is done on both woollen and cotton fabric. Flannelette is a cotton fabric that goes through this process. There are ways to 'raise the nap', most of which involve wire brushes such as raising cards. Originally, dried teasel pods were used and were still preferred for use on woollen cloth for a long time.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related lectures (1)
Textile Composites: Structures and Properties
Explores textile structures, production processes, properties, and deformation mechanisms of textile composites.
Related publications (12)

Experimental characterisation of textile compaction response: A benchmark exercise

Véronique Michaud, Baris Çaglar, Christophe Lopez

This paper reports the results of an international benchmark exercise on the measurement of fibre bed compaction behaviour. The aim was to identify aspects of the test method critical to obtain reliable results and to arrive at a recommended test procedure ...
2021

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

Véronique Michaud, Baris Çaglar, Lode Geeraard Daelemans

The through-thickness compressive behavior of fabric reinforcements is crucial in liquid composite molding manufacturing processes. Predictive simulations of the compressive response are thus necessary to enable a virtual processing workflow. These are com ...
2021

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

Véronique Michaud, Damiano Salvatori, Baris Çaglar, Amaël Maximilien Cohades

The out-of-plane permeability of two glass fibre fabrics was measured by 26 institutions using silicone oil as a test fluid. Participants in this study were free to select the test procedure, specimen dimensions and data analysis method, provided that test ...
2021
Show more
Related concepts (5)
Finishing (textiles)
In textile manufacturing, finishing refers to the processes that convert the woven or knitted cloth into a usable material and more specifically to any process performed after dyeing the yarn or fabric to improve the look, performance, or "hand" (feel) of the finish textile or clothing. The precise meaning depends on context. Fabric after leaving the loom or knitting machine is not readily useable. Called grey cloth at this stage, it contains natural and added impurities.
Glossary of textile manufacturing
The manufacture of textiles is one of the oldest of human technologies. To make textiles, the first requirement is a source of fiber from which a yarn can be made, primarily by spinning. The yarn is processed by knitting or weaving, which turns yarn into cloth. The machine used for weaving is the loom. For decoration, the process of colouring yarn or the finished material is dyeing. For more information of the various steps, see textile manufacturing.
Textile manufacturing
Textile manufacturing (or textile engineering) is a major industry. It is largely based on the conversion of fibre into yarn, then yarn into fabric. These are then dyed or printed, fabricated into cloth which is then converted into useful goods such as clothing, household items, upholstery and various industrial products. Different types of fibres are used to produce yarn. Cotton remains the most widely used and common natural fiber making up 90% of all-natural fibers used in the textile industry.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.