Concept

Iron oxide cycle

Summary
For chemical reactions, the iron oxide cycle (Fe3O4/FeO) is the original two-step thermochemical cycle proposed for use for hydrogen production. It is based on the reduction and subsequent oxidation of iron ions, particularly the reduction and oxidation between Fe3+ and Fe2+. The ferrites, or iron oxide, begins in the form of a spinel and depending on the reaction conditions, dopant metals and support material forms either Wüstites or different spinels. The thermochemical two-step water splitting process uses two redox steps. The steps of solar hydrogen production by iron based two-step cycle are: Where M can by any number of metals, often Fe itself, Co, Ni, Mn, Zn or mixtures thereof. The endothermic reduction step (1) is carried out at high temperatures greater than 1400degC, though the "Hercynite cycle" is capable of temperatures as low as 1200degC. The oxidative water splitting step (2) occurs at a lower ~1000degC temperature which produces the original ferrite material in addition to hydrogen gas. The temperature level is realized by using geothermal heat from magma or a solar power tower and a set of heliostats to collect the solar thermal energy. Like the traditional iron oxide cycle, the hercynite is based on the oxidation and reduction of iron atoms. However unlike the traditional cycle, the ferrite material reacts with a second metal oxide, aluminum oxide, rather than simply decomposing. The reactions take place via the following two reactions: The reduction step of the hercynite reaction takes place at temperature ~ 200degC lower than the traditional water splitting cycle (1200degC). This leads to lower radiation losses, which scale as temperature to the fourth power. The advantages of the ferrite cycles are: they have lower reduction temperatures than other 2-step systems, no metallic gasses are produced, high specific H2 production capacity, non-toxicity of the elements used and abundance of the constituent elements.
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related lectures (7)
Solar Thermochemistry: Solar Fuels and Redox Cycles
Delves into solar-driven thermochemistry for fuel production and the principles of solar thermochemical conversion devices.
Solar Fuels: Conversion Pathways and Reactor Concepts
Explores solar energy conversion into fuels, reactor concepts, and material requirements for efficient photoelectrochemistry.
Solar Fuels: Reactor Concepts and Conversion Pathways
Explores reactor designs, conversion pathways, and materials for solar fuel production, emphasizing solar thermolysis and thermochemical cycles.
Show more
Related publications (30)

Enhanced Solar-to-Fuel Efficiency of Ceria-Based Thermochemical Cycles via Integrated Electrochemical Oxygen Pumping

Sophia Haussener, Clemens Gregor Suter, Meng Lin

The solar thermochemical cycle based on ceria is a promising route for renewable fuel production. The solar-to-fuel efficiency of a thermochemical reactor is highly dependent on the oxygen removal during the reduction step. Conventional nitrogen sweeping ( ...
AMER CHEMICAL SOC2022

Multiphase processes in the EC-Earth model and their relevance to the atmospheric oxalate, sulfate, and iron cycles

Athanasios Nenes

Understanding how multiphase processes affect the iron-containing aerosol cycle is key to predicting ocean biogeochemistry changes and hence the feedback effects on climate. For this work, the EC-Earth Earth system model in its climate-chemistry configurat ...
COPERNICUS GESELLSCHAFT MBH2022

High-valence metals improve oxygen evolution reaction performance by modulating 3dmetal oxidation cycle energetics

Likai Zheng, Yang Li, Yelin Hu, Jun Li, Ye Zhang, Ziyun Wang, Bo Zhang, Zhen Cao

Multimetal oxyhydroxides have recently been reported that outperform noble metal catalysts for oxygen evolution reaction (OER). In such 3d-metal-based catalysts, the oxidation cycle of 3dmetals has been posited to act as the OER thermodynamic-limiting proc ...
NATURE RESEARCH2020
Show more
Related units (1)
Related concepts (9)
Copper–chlorine cycle
The copper–chlorine cycle (Cu–Cl cycle) is a four-step thermochemical cycle for the production of hydrogen. The Cu–Cl cycle is a hybrid process that employs both thermochemical and electrolysis steps. It has a maximum temperature requirement of about 530 degrees Celsius. The Cu–Cl cycle involves four chemical reactions for water splitting, whose net reaction decomposes water into hydrogen and oxygen. All other chemicals are recycled.
Zinc–zinc oxide cycle
For chemical reactions, the zinc–zinc oxide cycle or Zn–ZnO cycle is a two step thermochemical cycle based on zinc and zinc oxide for hydrogen production with a typical efficiency around 40%. The thermochemical two-step water splitting process uses redox systems: Dissociation: ZnO → Zn + 1/2 O2 Hydrolysis: Zn + H2O → ZnO + H2 For the first endothermic step concentrating solar power is used in which zinc oxide is thermally dissociated at into zinc and oxygen.
Hybrid sulfur cycle
The hybrid sulfur cycle (HyS) is a two-step water-splitting process intended to be used for hydrogen production. Based on sulfur oxidation and reduction, it is classified as a hybrid thermochemical cycle because it uses an electrochemical (instead of a thermochemical) reaction for one of the two steps. The remaining thermochemical step is shared with the sulfur-iodine cycle. The Hybrid sulphur cycle (HyS)was initially proposed and developed by Westinghouse Electric Corp. in the 1970s, so it is also known as the "Westinghouse" cycle.
Show more