Summary
Write amplification (WA) is an undesirable phenomenon associated with flash memory and solid-state drives (SSDs) where the actual amount of information physically written to the storage media is a multiple of the logical amount intended to be written. Because flash memory must be erased before it can be rewritten, with much coarser granularity of the erase operation when compared to the write operation, the process to perform these operations results in moving (or rewriting) user data and metadata more than once. Thus, rewriting some data requires an already-used-portion of flash to be read, updated, and written to a new location, together with initially erasing the new location if it was previously used. Due to the way flash works, much larger portions of flash must be erased and rewritten than actually required by the amount of new data. This multiplying effect increases the number of writes required over the life of the SSD, which shortens the time it can operate reliably. The increased writes also consume bandwidth to the flash memory, which reduces write performance to the SSD. Many factors will affect the WA of an SSD; some can be controlled by the user and some are a direct result of the data written to and usage of the SSD. Intel and SiliconSystems (acquired by Western Digital in 2009) used the term write amplification in their papers and publications in 2008. WA is typically measured by the ratio of writes committed to the flash memory to the writes coming from the host system. Without compression, WA cannot drop below one. Using compression, SandForce has claimed to achieve a write amplification of 0.5, with best-case values as low as 0.14 in the SF-2281 controller. Flash memory and Solid-state drive Due to the nature of flash memory's operation, data cannot be directly overwritten as it can in a hard disk drive. When data is first written to an SSD, the cells all start in an erased state so data can be written directly using pages at a time ( in size).
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.