Desiccant | EPFL Graph Search

Are you an EPFL student looking for a semester project?

Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.

A desiccant is a hygroscopic substance that is used to induce or sustain a state of dryness (desiccation) in its vicinity; it is the opposite of a humectant. Commonly encountered pre-packaged desiccants are solids that absorb water. Desiccants for specialized purposes may be in forms other than solid, and may work through other principles, such as chemical bonding of water molecules. They are commonly encountered in foods to retain crispness. Industrially, desiccants are widely used to control the level of water in gas streams. List of desiccants Although some desiccants are chemically inert, others are extremely reactive and require specialized handling techniques. The most common desiccant is silica gel, an otherwise inert, nontoxic, water-insoluble white solid. Tens of thousands of tons are produced annually for this purpose. Other common desiccants include activated charcoal, calcium sulfate, calcium chloride, and molecular sieves (typically, zeolites). Desiccants may also be categorized by their type, either I,II,III,IV, or V. These types are a function of the shape of the desiccant's moisture sorption isotherm. Alcohols and acetones are also dehydrating agents. One measure of desiccant efficiency is the ratio (or percentage) of water storable in the desiccant relative to the mass of desiccant. Another measure is the residual relative humidity of the air or other fluid being dried. The performance of any desiccant varies with temperature and both relative humidity and absolute humidity. To some extent, desiccant performance can be precisely described, but most commonly, the final choice of which desiccant best suits a given situation, how much of it to use, and in what form, is made based on testing and practical experience. Sometimes a humidity indicator is included in the desiccant to show, by color changes, the degree of water-saturation of the desiccant. One commonly used indicator is cobalt chloride (CoCl2). Anhydrous cobalt chloride is blue. When it bonds with two water molecules, (CoCl2•2H2O), it turns purple.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (15)

Related people (2)

Related units (1)

Related concepts (15)

Related lectures (4)

Dynamic CO2 sorption on MgO-based sorbent in the presence of CO and H2O at elevated pressures

Seongmin Jin, Gina Bang

The presence of gas species other than the target adsorbate in practical conditions causes complications in implementing a sorption-based process because of synergistic or detrimental effects on the sorption mechanism. MgO-based sorbents have attracted mas ...

ELSEVIER SCIENCE SA2022

Stabilizing Unusual Oxidation States of Lanthanides in Molecular Complexes: Synthesis, Properties, and Reactivity

Aurélien René Willauer

The chemistry of divalent lanthanides has generated increasing interest in the past years due to their redox properties and unique reaction pathways. Notably, molecular complexes of low-valent lanthanides have been shown to be suitable one-electron reducta ...

EPFL2022

Characterization of Chemisorbed Species and Active Adsorption Sites in Mg-Al Mixed Metal Oxides for High-Temperature CO2 Capture

Berend Smit, Susana Garcia Lopez, Kevin Maik Jablonka, Christopher Patrick Ireland

Mg-Al mixed metal oxides (MMOs), derived from the decomposition of layered double hydroxides (LDHs), have been purposed as adsorbents for CO2 capture of industrial plant emissions. To aid in the design and optimization of these materials for CO2 capture at ...

AMER CHEMICAL SOC2022

Silica gel

Silica gel is an amorphous and porous form of silicon dioxide (silica), consisting of an irregular tridimensional framework of alternating silicon and oxygen atoms with nanometer-scale voids and pores. The voids may contain water or some other liquids, or may be filled by gas or vacuum. In the last case, the material is properly called silica xerogel. Silica xerogel with an average pore size of 2.4 nanometers has a strong affinity for water molecules and is widely used as a desiccant.

Anhydrous

A substance is anhydrous if it contains no water. Many processes in chemistry can be impeded by the presence of water; therefore, it is important that water-free reagents and techniques are used. In practice, however, it is very difficult to achieve perfect dryness; anhydrous compounds gradually absorb water from the atmosphere so they must be stored carefully. Many salts and solids can be dried using heat dogs, or under vacuum. Desiccators can also be used to store reagents in dry conditions.

Calcium chloride

Calcium chloride is an inorganic compound, a salt with the chemical formula . It is a white crystalline solid at room temperature, and it is highly soluble in water. It can be created by neutralising hydrochloric acid with calcium hydroxide. Calcium chloride is commonly encountered as a hydrated solid with generic formula , where n = 0, 1, 2, 4, and 6. These compounds are mainly used for de-icing and dust control. Because the anhydrous salt is hygroscopic and deliquescent, it is used as a desiccant.

Covers Newton's experiments with various chemical reactions and transformations.

Explores capacitive humidity sensors, hygroscopic polymers, dew point measurement, and proximity sensors.

Explores the challenges of measuring moisture sorption isotherms in cement-based materials, emphasizing the complexities and practical implications of the process.