Frame Relay is a standardized wide area network (WAN) technology that specifies the physical and data link layers of digital telecommunications channels using a packet switching methodology. Originally designed for transport across Integrated Services Digital Network (ISDN) infrastructure, it may be used today in the context of many other network interfaces.
Network providers commonly implement Frame Relay for voice (VoFR) and data as an encapsulation technique used between local area networks (LANs) over a WAN. Each end-user gets a private line (or leased line) to a Frame Relay node. The Frame Relay network handles the transmission over a frequently changing path transparent to all end-user extensively used WAN protocols. It is less expensive than leased lines and that is one reason for its popularity. The extreme simplicity of configuring user equipment in a Frame Relay network offers another reason for Frame Relay's popularity.
With the advent of Ethernet over fiber optics, MPLS, VPN and dedicated broadband services such as cable modem and DSL, Frame Relay has become less popular in recent years.
The designers of Frame Relay aimed to provide a telecommunication service for cost-efficient data transmission for intermittent traffic between local area networks (LANs) and between end-points in a wide area network (WAN). Frame Relay puts data in variable-size units called "frames" and leaves any necessary error-correction (such as retransmission of data) up to the end-points. This speeds up overall data transmission. For most services, the network provides a permanent virtual circuit (PVC), which means that the customer sees a continuous, dedicated connection without having to pay for a full-time leased line, while the service-provider figures out the route each frame travels to its destination and can charge based on usage.
An enterprise can select a level of service quality, prioritizing some frames and making others less important. Frame Relay can run on fractional T-1 or full T-carrier system carriers (outside the Americas, E1 or full E-carrier).
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
L'objectif de ce cours est d'apprendre à réaliser de manière rigoureuse et critique des analyses par éléments finis de problèmes concrets en mécanique des solides à l'aide d'un logiciel CAE moderne.
A hands-on approach on how sensing works is complemented with theoretical insights to reflect on the critical zones opened up for urban research by the expansion of coded environments, providing the s
In telecommunications, packet switching is a method of grouping data into packets that are transmitted over a digital network. Packets are made of a header and a payload. Data in the header is used by networking hardware to direct the packet to its destination, where the payload is extracted and used by an operating system, application software, or higher layer protocols. Packet switching is the primary basis for data communications in computer networks worldwide.
A computer network is a set of computers sharing resources located on or provided by network nodes. Computers use common communication protocols over digital interconnections to communicate with each other. These interconnections are made up of telecommunication network technologies based on physically wired, optical, and wireless radio-frequency methods that may be arranged in a variety of network topologies. The nodes of a computer network can include personal computers, servers, networking hardware, or other specialized or general-purpose hosts.
X.25 is an ITU-T standard protocol suite for packet-switched data communication in wide area networks (WAN). It was originally defined by the International Telegraph and Telephone Consultative Committee (CCITT, now ITU-T) in a series of drafts and finalized in a publication known as The Orange Book in 1976. This makes it one of the oldest packet-switching communication protocols available; it was developed several years before IPv4 (1981) and the OSI Reference Model (1984).
Decentralized signal control of congested traffic networks based on the Max-Pressure (MP) controller is theoretically proven to maximize throughput, stabilize the system and balance queues for single intersections under specific conditions. However, its pe ...
2022
, ,
Signalized intersections are a fundamental part of urban networks. Their understanding is crucial to identify congestion patterns, queues, delays, and safety issues in local and network level. In this work, we analyze multimodal vehicle trajectories and pr ...
2022
, ,
The time-resolved visualization of the dynamics of a cavitation bubble usually requires the use of expensive high-speed cameras, which often provide a limited spatial resolution. In the present study, we propose an alternative to these high-speed imaging t ...