Network interface device

In telecommunications, a network interface device (NID; also known by several other names) is a device that serves as the demarcation point between the carrier's local loop and the customer's premises wiring. Outdoor telephone NIDs also provide the subscriber with access to the station wiring and serve as a convenient test point for verification of loop integrity and of the subscriber's inside wiring. Generically, an NID may also be called a network interface unit (NIU), telephone network interface (TNI), system network interface (SNI), or telephone network box. Australia's National Broadband Network uses the term network termination device or NTD. A smartjack is a type of NID with capabilities beyond simple electrical connection, such as diagnostics. An optical network terminal (ONT) is a type of NID used with fiber-to-the-premises applications. The simplest NIDs are essentially just a specialized set of wiring terminals. These will typically take the form of a small, weather-proof box, mounted on the outside of the building. The telephone line from the telephone company will enter the NID and be connected to one side. The customer connects their wiring to the other side. A single NID enclosure may contain termination for a single line or multiple lines. In its role as the demarcation point (dividing line), the NID separates the telephone company's equipment from the customer's wiring and equipment. The telephone company owns the NID itself, and all wiring up to it. Anything past the NID is the customer's responsibility. To facilitate this, there is typically a test jack inside the NID. Accessing the test jack disconnects the customer premises wiring from the public switched telephone network and allows the customer to plug a "known good" telephone into the jack to isolate trouble. If the telephone works at the test jack, the problem is the customer's wiring, and the customer is responsible for repair. If the telephone does not work, the line is faulty and the telephone company is responsible for repair.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (6)

Related concepts (2)

Fiber to the x

Fiber to the x (FTTX; also spelled "fibre") or fiber in the loop is a generic term for any broadband network architecture using optical fiber to provide all or part of the local loop used for last mile telecommunications. As fiber optic cables are able to carry much more data than copper cables, especially over long distances, copper telephone networks built in the 20th century are being replaced by fiber.

Customer-premises equipment

In telecommunications, a customer-premises equipment or customer-provided equipment (CPE) is any terminal and associated equipment located at a subscriber's premises and connected with a carrier's telecommunication circuit at the demarcation point ("demarc"). The demarc is a point established in a building or complex to separate customer equipment from the equipment located in either the distribution infrastructure or central office of the communications service provider.

Design and Fabrication of Stretchable Photonic Fibers

Nicola Bartolomei

Optical fibers have reshaped the technological landscape, from optical networks and high-speed data communication to in situ imaging and non-invasive surgery methods. The revolution allowed by these fibers has been made possible by its fabrication method, ...

EPFL2021

Fiber-interface directional coupler inscribed by femtosecond laser for refractive index measurements

Jiangtao Zhou, Zhechen Zhang, Yiping Wang, Jiachen Wang

A novel fiber-interface directional waveguide coupler was inscribed on the surface of a coreless fiber by femtosecond laser, and was successfully applied to highly sensitive refractive index (RI) measurements. The primary arm was first inscribed to couple ...

OPTICAL SOC AMER2020

New multichannel Ethernet protocol for passive optical star local area networks using coherent transmission

Philippe Robert, Hector Garcia, Caroline Brisson

A new optical local area network that combines dense Wavelength Division Multiplexing (WDM) techniques and coherent transmission benefits is presented. A new multichannel protocol is specified based on Ethernet, using WDM to carry multiple channels on a si ...

1998