Solar gain (also known as solar heat gain or passive solar gain) is the increase in thermal energy of a space, object or structure as it absorbs incident solar radiation. The amount of solar gain a space experiences is a function of the total incident solar irradiance and of the ability of any intervening material to transmit or resist the radiation.
Objects struck by sunlight absorb its visible and short-wave infrared components, increase in temperature, and then re-radiate that heat at longer infrared wavelengths. Though transparent building materials such as glass allow visible light to pass through almost unimpeded, once that light is converted to long-wave infrared radiation by materials indoors, it is unable to escape back through the window since glass is opaque to those longer wavelengths. The trapped heat thus causes solar gain via a phenomenon known as the greenhouse effect. In buildings, excessive solar gain can lead to overheating within a space, but it can also be used as a passive heating strategy when heat is desired.
Solar gain is most frequently addressed in the design and selection of windows and doors. Because of this, the most common metrics for quantifying solar gain are used as a standard way of reporting the thermal properties of window assemblies. In the United States, The American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), and The National Fenestration Rating Council (NFRC) maintain standards for the calculation and measurement of these values.
The shading coefficient (SC) is a measure of the radiative thermal performance of a glass unit (panel or window) in a building. It is defined as the ratio of solar radiation at a given wavelength and angle of incidence passing through a glass unit to the radiation that would pass through a reference window of frameless Clear Float Glass. Since the quantities compared are functions of both wavelength and angle of incidence, the shading coefficient for a window assembly is typically reported for a single wavelength typical of solar radiation entering normal to the plane of glass.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Ce cours vise à donner aux architectes les connaissances et le regard critique nécessaires à utiliser des technologies et stratégies solaires adaptés (passives et actives, hivernales et estivales) dan
The course will provide fundamentals and technological details of solar energy conversion devices and systems, including 1) solar fuels by photoelectrochemistry, photocatalysis, and solar thermochemis
The course presents the fundamentals of energy demand in buildings while emphasizing the need for the comfort and well-being of occupants. In addition, prioritizations and trade-offs between energy an
It is highly uncertain how the humidity flux between the snow surface and the atmosphere contributes to the surface mass balance (SMB) of the interior Greenland Ice Sheet (GrIS). Due to sparse observations, evaluations of the simulated humidity flux are li ...
Gottingen2024
,
Energy-efficient windows are being used to increase the thermal insulation of a fa & ccedil;ade. Such insulating windows contain an ultra-thin, multilayered, transparent silver coating that acts as an infrared mirror which significantly reduces thermal los ...
The global construction industry contributes to 37% of carbon emissions associated to both building operations and construction. To help achieve the net-zero targets set by 2050, it is mandated to achieve a 50% reduction in carbon emissions by 2030. As we ...