An edge-localized mode (ELM) is a plasma instability occurring in the edge region of a tokamak plasma due to periodic relaxations of the edge transport barrier in high-confinement mode. Each ELM burst is associated with expulsion of particles and energy from the confined plasma into the scrape-off layer. This phenomenon was first observed in the ASDEX tokamak in 1981. Diamagnetic effects in the model equations expand the size of the parameter space in which solutions of repeated sawteeth can be recovered compared to a resistive MHD model. An ELM can expel up to 20 percent of the reactor's energy. ELM is a major challenge in magnetic fusion research with tokamaks, as these instabilities can: Damage wall components (in particular divertor plates) by ablating them away due to their extremely high energy transfer rate (GW/m2); Potentially couple or trigger other instabilities, such as the resistive wall mode (RWM) or the neoclassical tearing mode (NTM). A variety of experiments/simulations have attempted to mitigate damage from ELM. Techniques include: Application of resonant magnetic perturbations (RMPs) with in-vessel current carrying coils can eliminate or weaken ELMs. Injecting pellets to increase the frequency and thereby decrease the severity of ELM bursts (ASDEX Upgrade). Multiple small-scale ELMs (000s/s) in tokamaks to prevent the creation of large ones, spreading the associated heat over a larger area and interval Increase the plasma density and, at high densities, adjusting the topology of the magnetic field lines confining the plasma. In 2003 DIII-D begn experimenting with resonant magnetic perturbations to control ELMs. In 2006 an initiative (Project Aster) was started to simulate a full ELM cycle including its onset, the highly non-linear phase, and its decay. However, this did not constitute a “true” ELM cycle, since a true ELM cycle would require modeling the slow growth after the crash, in order to produce a second ELM. As of late 2011, several research facilities had demonstrated active control or suppression of ELMs in tokamak plasmas.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related lectures (8)
MHD Plasma Approximation
Covers the MHD plasma approximation, discussing macroscopic phenomena and phase velocities.
Diffusion and Transport in Tokamak Plasmas
Explores diffusive transport, classical and neo-classical diffusion, and turbulent transport in tokamak plasmas.
Gaussian Wave Packets: Theory and Applications
Explores Gaussian wave packets theory, focusing on their propagation and applications in different potentials.
Show more
Related publications (363)

Overview of fast particle experiments in the first MAST Upgrade experimental campaigns

Matteo Vallar

MAST-U is equipped with on-axis and off-axis neutral beam injectors (NBI), and these external sources of super-Alfv & eacute;nic deuterium fast-ions provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in ...
Iop Publishing Ltd2024

Progress in the development of the ITER baseline scenario in TCV

Olivier Sauter, Stefano Coda, Benoît Labit, Alessandro Pau, Alexander Karpushov, Antoine Pierre Emmanuel Alexis Merle, Oleg Krutkin, Cassandre Ekta Contré, Reinart Andreas J. Coosemans, Stefano Marchioni, Yann Camenen, Matteo Vallar, Filippo Bagnato, Simon Van Mulders

Under the auspices of EUROfusion, the ITER baseline (IBL) scenario has been jointly investigated on AUG and TCV in the past years and this paper reports on the developments on TCV. It is found that the performance of TCV IBL is mainly limited by (neoclassi ...
2024

First-principle based predictions of the effects of negative triangularity on DTT scenarios

Olivier Sauter, Gabriele Merlo, Alberto Mariani

Plasmas with negative triangularity (NT) shape have been recently shown to be able to achieve H-mode levels of confinement in L-mode, avoiding detrimental edge localised modes. Therefore, this plasma geometry is now studied as a possible viable option for ...
Bristol2024
Show more
Related concepts (1)
Tokamak
A tokamak (ˈtoʊkəmæk; токамáк) is a device which uses a powerful magnetic field to confine plasma in the shape of a torus. The tokamak is one of several types of magnetic confinement devices being developed to produce controlled thermonuclear fusion power. , it was the leading candidate for a practical fusion reactor. Tokamaks were initially conceptualized in the 1950s by Soviet physicists Igor Tamm and Andrei Sakharov, inspired by a letter by Oleg Lavrentiev. The first working tokamak was attributed to the work of Natan Yavlinsky on the T-1 in 1958.
Related MOOCs (7)
Plasma Physics and Applications [retired]
The first MOOC to teach the basics of plasma physics and its main applications: fusion energy, astrophysical and space plasmas, societal and industrial applications
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Plasma Physics: Introduction
Learn the basics of plasma, one of the fundamental states of matter, and the different types of models used to describe it, including fluid and kinetic.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.