Martinus GijsMartin A.M. Gijs received his degree in physics in 1981 from the Katholieke Universiteit Leuven, Belgium and his Ph.D. degree in physics at the same university in 1986. He joined the Philips Research Laboratories in Eindhoven, The Netherlands, in 1987. Subsequently, he has worked there on micro-and nano-fabrication processes of high critical temperature superconducting Josephson and tunnel junctions, the microfabrication of microstructures in magnetic multilayers showing the giant magnetoresistance effect, the design and realisation of miniaturised motors for hard disk applications and the design and realisation of planar transformers for miniaturised power applications. He joined EPFL in 1997. His present interests are in developing technologies for novel magnetic devices, new microfabrication technologies for microsystems fabrication in general and the development and use of microsystems technologies for microfluidic and biomedical applications in particular.
Andras Kis2015− Associate professor, EPFL, STI, Institute of Electrical Engineering (IEL) and Materials Science and Engineering Institute (IMX)
2008−2015 Tenure-track assistant professor at EPFL, School of Engineering (STI), Institute of Electrical Engineering (IEL)
2004−2007 Postdoctoral researcher at the University of California, Berkeley, Physics Department in the group of Prof. Zettl
2000−2003 PhD student at EPFL, Faculty of basic sciences, Institute of physics of complex matter, group of Prof. Forró
1994−1999 MS, Physics, University of Zagreb, Croatia
1994 Baccalaureate, MIOC (Mathematical and Informational Educational Center) high school
Alireza KarimiAlireza Karimi received his B. Sc. and M. Sc. degrees in Electrical Engineering in 1987 and 1990, respectively, from Amir Kabir University (Tehran Polytechnic). Then he received his DEA and Ph. D. degrees both on Automatic Control from Institut National Polytechnique de Grenoble (INPG) in 1994 and 1997, respectively. He was Assistant Professor at Electrical Engineering Department of Sharif University of Technology in Teheran from 1998 to 2000. Then he joined Automatic Laboratory of Swiss Federal Institute of Technology at Lausanne, Switzerland. He is currently Professor of Automatic Control and the head of "Data-Driven Modelling and Control" group. His research interests include data-driven controller tuning and robust control with application to mechatronic systems and electrical grids.
Emad OveisiDr Emad Oveisi is a senior scientist at the Interdisciplinary Centre for Electron Microscopy (CIME), EPFL.
Emad received a BSc in Metallurgy and Materials Engineering (2005) and an MSc in Materials Science (2008) both from the University of Tehran (Iran). He graduated with a PhD in Materials Science and Engineering at EPFL in 2014 for a thesis on the "Three-Dimensional STEM Imaging of Dislocations" under the direction of Prof. Cécile Hébert. The PhD thesis at the Electron Spectrometry and Microscopy Laboratory (LSME), served as an introduction to many of the advanced microscopy techniques that have proven to be a platform for his research career. A post-doctoral research at the centre for electron microscopy gave him the opportunity to peruse a cutting-edge research on one of the most modern aberration-corrected transmission electron microscopes.Since the inauguration of the Energypolis campus of EPFL in Sion, he has been the manager and reference scientist of the electron microscopy platform of EPFL-Valais, working with 9 research groups and more than 200 researchers. In addition to this core responsibility, he provides advanced microscopy consulting and service to EPFL scientists and assist their research to the highest level possible.
Emad Oveisi’s research focuses on the application and development of novel electron microscopy techniques, with emphasis on 3D imaging of crystal defects, as well as the precision measurement of materials properties using aberration-corrected S/TEM. In 2018, he received the prestigious Microscopy Innovation Award for inventing “Single-shot three-dimensional electron imaging”, a novel technique that enables 3D imaging of in situ dynamics.
In 2016 Emad was elected as an interim representative for the scientific staff ("corps intermédiaire") to the Council of the Institute of Chemistry (ISIC). Since 2019, he is a member of EPFL Teachers’ Council (CCE) and has been elected as one of its four bureau members. This role allows him to be exposed to new ideas and pedagogical challenges, as well being involved in discussions with the Vice Presidency of Education (VPE) and other teaching organisations for defining teaching strategies at the EPFL.
Niels QuackProf. Dr. Niels Quack received the M.Sc. degree from Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland, in 2005, and the Dr.Sc. degree from Eidgenössische Technische Hochschule Zürich (ETH), Zürich, Switzerland, in 2010. From 2011 to 2015, he was Postdoctoral Researcher and Visiting Scholar with the Integrated Photonics Laboratory, Berkeley Sensor and Actuator Center, University of California, Berkeley, CA, USA. From 2014 to 2015, he was Senior MEMS Engineer with Sercalo Microtechnology, Neuchâtel, Switzerland. He is currently an SNSF Assistant Professor with Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland. He has authored and co-authored more than 50 papers in leading technical journals and conferences. His research interests include photonic micro and nanosystems, with an emphasis on diamond photonics and silicon photonic MEMS. He is Steering Committee Member of the IEEE International Conference on Optical MEMS and Nanophotonics (OMN) and served as General Chair of the IEEE OMN 2018 and the Latsis Symposium 2019 on Diamond Photonics. He is a Senior Member of IEEE, Member of The Optical Society (OSA) and life member of SPIE.
