Francesco StellacciFrancesco Stellacci graduated in Materials Engineering at the Politecnico di Milano in 1998 with a thesis on photochromic polymers with Prof. Giuseppe Zerbi and Mariacarla Gallazzi. In 1999 he moved to the Chemistry Department of the University of Arizona for as a post-doc in the group of Joe Perry in close collaboration with the group of Seth Marder. In 2002 he moved to the Department of Materials Science and Engineering at the Massachusetts Institute of Technology as an assistant professor. He was then promoted to associate without (2006) and with tenure (2009). In 2010 he moved to the Institute of Materials at EPFL as a full Professor. He holds the Alcan EP Chair. Francesco was one of the recipients of the Technology Review TR35 "35 Innovator under 35" award in 2005, and the Popular Science Magazine "Brilliant 10" award in 2007. He has been a Packard Fellow starting 2005.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Rainer BeckProfessor titulaire EPFL, 2006
Privat Docent EPFL, 1997
Habilitation and venia legendi, Universität Karlsruhe, 1996
Ph.D. in Physical Chemistry, Oregon State University, 1990
Degree in Physics, Universität Stuttgart, 1985
Horst VogelHorst Vogel est né en 1948 à Würzburg, Allemagne. Après ses études en chimie, il obtient le diplôme de chimie en 1974 de l'Université de Würzburg.Il entreprend ensuite un travail de doctorat au Max-Planck Institut für Biophysikalische Chemie de Göttingen, et obtient en 1978 le grade de docteur ès sciences de l'Université de Göttingen. De 1978 à 1983 il effectue des recherches au Max-Planck Institut für Biologie à Tübingen et en 1984, il rejoint le Biocentre à Bâle où il travaille jusqu'en 1989, effectuant une année au Karolinska Institute à Stockholm. En 1989, Horst Vogel rejoint l'institut de chimie physique de l'EPFL où il dirige un groupe travaillant dans les domaines de la biophysique et de la bioélectronique.
Depuis le 1er octobre 1994 il est profeseur en chimie physique des polymères et membranes au Département de chimie de EPFL. Ses intérêts de recherche sont l'étude de la structure et de la dynamique de récepteurs membranaires et l'auto-assemblage des biomolécules aux interfaces pour développer de nouveaux biocapteurs dans le domaine de micro- et nanotechnologie. Il enseigne les sciences du vivant, la biophysique et biochimie, et des chapitres concernant la biotechnologie.
Dipl. in Chemistry1974-Univ. Würzburg, DE
Ph.D.-1978-MPI für Biophys. Chemie, Göttingen, DE
Anirudh Raju NatarajanAnirudh received a B.Tech. in Metallurgical and Materials Engineering from the Indian Institute of Technology, Madras, a M.S in Materials Science and Engineering from the University of Michigan, Ann Arbor and a Ph.D. in Materials from the University of California, Santa Barbara. He set up the laboratory of materials design and simulation (MADES) at EPFL in 2022. His research interests are in the computational design and discovery of advanced engineering materials.
Zhaofu Fei1999, Phd in Chemistry, Braunschweig, Germany,
2002, Lausanne, EPFL, Scientist.
