Martin OderskyMartin Odersky heads the programming research group at EPFL. His research interests cover fundamental as well as applied aspects of programming languages. They include semantics, type systems, programming language design, and compiler construction. The main focus if his work lies in the integration of object-oriented and functional programming. His research thesis is that the two paradigms are just two sides of the same coin and should be unified as much as possible. To prove this he has experimented a number of language designs, from Pizza to GJ to Functional Nets. He has also influenced the development of Java as a co-designer of Java generics and as the original author of the current javac reference compiler. His current work concentrates on the Scala programming language, which unifies FP and OOP, while staying completely interoperable with Java and .NET.
Martin Odersky got his doctorate from ETHZ, in 1989. He held research positions at the IBM T.J. Watson Research Center from 1989 and at Yale University from 1991. He was then a professor at the University of Karlsruhe from 1993 and at the University of South Australia from 1997. He joined EPFL as full professor in 1999. He is associate editor of the Journal of Functional Programming and member of IFIP WG 2.8. He was conference chair for ICFP 2000, and program chair for ECOOP 2004 as well as ETAPS/CC 2007.
Rachid GuerraouiRachid Guerraoui has been affiliated with Ecole des Mines of Paris, the Commissariat à l'Energie Atomique of Saclay, Hewlett Packard Laboratories and the Massachusetts Institute of Technology. He has worked in a variety of aspects of distributed computing, including distributed algorithms and distributed programming languages. He is most well known for his work on (e-)Transactions, epidemic information dissemination and indulgent algorithms.
He co-authored a book on Transactional Systems (Hermes) and a book on reliable distributed programming (Springer). He was appointed program chair of ECOOP 1999, ACM Middleware 2001, IEEE SRDS 2002, DISC 2004 and ACM PODC 2010.
His publications are available at http://lpdwww.epfl.ch/rachid/papers/generalPublis.html Colin Neil JonesColin Jones is an Associate Professor in the Automatic Control Laboratory at the Ecole Polytechnique Federale de Lausanne (EPFL) in Switzerland. He was a Senior Researcher at the Automatic Control Lab at ETH Zurich until 2011 and obtained a PhD in 2005 from the University of Cambridge for his work on polyhedral computational methods for constrained control. Prior to that, he was at the University of British Columbia in Canada, where he took a BASc and MASc in Electrical Engineering and Mathematics. Colin has worked in a variety of industrial roles, ranging from commercial building control to the development of custom optimization tools focusing on retail human resource scheduling. His current research interests are in the theory and computation of predictive control and optimization, and their application to green energy generation, distribution and management.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Roberto CastelloRoberto Castello is a senior scientist and group leader at the EPFL Laboratory of Solar Energy and Building Physics. Physicist by training, he has extensive experience in collecting, classifying and interpreting large datasets using advanced data mining techniques and statistical methods. He received his MSc (2007) in Particle Physics and PhD (2010) in Physics and Astrophysics from the University of Torino. He worked as a postdoctoral researcher at the Belgian National Research Fund (2011-2014) and at the CERN Experimental Physics Department (2015-2017) as a research fellow and data scientist. He is primary author of more than 20 peer-reviewed publications and he presented at major international conferences in the high energy physics domain.
In 2018 he joined the Solar Energy and Building Physics Laboratory (LESO-PB) to work on data mining and Machine Learning techniques for the built environment and renewable energy. His main research interests are: spatio-temporal modeling of renewable energy potential, energy consumption forecasting techniques, anomaly detection, and computer vision techniques for automated classification in the built environment.
He leads the group of Urban Data Mining, Intelligence and Simulation at LESO-PB and he is a member of the NRP75 Big Data project (HyEnergy) of the Swiss National Science Foundation. He is a member of the Swiss Competence Centre for Energy Research (SCCER) and deputy leader of the working group on Leveraging Ubiquitous Energy Data. He has served as a scientific committee member, workshop organizer and speaker at international conferences (ICAE 2020, Applied Machine Learning Days 2019 and 2020, CISBAT 2019 and 2021 and SDS2020).
Since 2017 he is member of the Geneva 2030 Ecosystem network, promoting the United Nations agenda towards the realization of the Sustainable Development Goals (SDGs).
