François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Francesca De SimoneI am a Post-doctoral fellow in the Signal Processing Laboratory (LTS4) EPFL, Lausanne, Switzerland, since November 2015.
From January 2015 to October 2015 I worked as Senior Security Engineer, anti-piracy video streaming expert at Kudelski Group, Cheseaux-sur-Lausanne, Switzerland. Before that, from November 2012 to December 2014 I was Post-doctoral fellow in the Multimedia Signal Processing Lab at Institut Mines Telecom ParisTech, Paris, France, working with Dr. Frederic Dufaux.
I received the Ph.D. degree in computer and information science from Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland, in 2012 and M.S. degree in electrical engineering from University of Roma Tre, Rome, Italy, in 2006.
My research interests concern omnidirectional imaging, multimedia quality assessment, image and video coding, video streaming, human attention modeling, highy dynamic range imaging, image and video representation and analysis, psychophysics, statistics.
You can find an updated list of my publications at Google Scholar.
Roberto CastelloRoberto Castello is a senior scientist and group leader at the EPFL Laboratory of Solar Energy and Building Physics. Physicist by training, he has extensive experience in collecting, classifying and interpreting large datasets using advanced data mining techniques and statistical methods. He received his MSc (2007) in Particle Physics and PhD (2010) in Physics and Astrophysics from the University of Torino. He worked as a postdoctoral researcher at the Belgian National Research Fund (2011-2014) and at the CERN Experimental Physics Department (2015-2017) as a research fellow and data scientist. He is primary author of more than 20 peer-reviewed publications and he presented at major international conferences in the high energy physics domain.
In 2018 he joined the Solar Energy and Building Physics Laboratory (LESO-PB) to work on data mining and Machine Learning techniques for the built environment and renewable energy. His main research interests are: spatio-temporal modeling of renewable energy potential, energy consumption forecasting techniques, anomaly detection, and computer vision techniques for automated classification in the built environment.
He leads the group of Urban Data Mining, Intelligence and Simulation at LESO-PB and he is a member of the NRP75 Big Data project (HyEnergy) of the Swiss National Science Foundation. He is a member of the Swiss Competence Centre for Energy Research (SCCER) and deputy leader of the working group on Leveraging Ubiquitous Energy Data. He has served as a scientific committee member, workshop organizer and speaker at international conferences (ICAE 2020, Applied Machine Learning Days 2019 and 2020, CISBAT 2019 and 2021 and SDS2020).
Since 2017 he is member of the Geneva 2030 Ecosystem network, promoting the United Nations agenda towards the realization of the Sustainable Development Goals (SDGs).
Michel DeclercqMichel J. Declercq received the Electrical Engineering degree and the PhD degree from the Catholic University of Louvain, Belgium, in 1967 and 1971, respectively. In 1973, he was awarded a Senior Fulbright Fellowship, and joined Stanford University as a Research Associate in the Microelectronics Labs. From 1974 to 1978, he was Research Associate and lecturer at the Catholic University of Louvain, Belgium. In 1978, he joined the company Tractebel in Brussels, Belgium, where he was Group Leader of the Electronic Systems team.
In 1985, Dr. Declercq joined the Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland, where he is currently Professor, Dean of the School of Engineering, and Director of the Electronics Laboratory. His research activities are related to mixed analog-digital I.C. design and design methodologies. He is more particularly involved in low-power/low-voltage circuits, high-frequency circuits for telecommunications, MEMS and RF-MEMS, SOI technology and circuits, high-voltage circuits and Nano-electronics. He is author and co-author of more than 220 scientific publications and 3 books, and holds several patents.
He is a Fellow of the IEEE (Institute of Electrical and Electronic Engineers).
Professor Declercq is expert by the European Commission for the scientific research programs in Information Technologies.
Hubert GiraultEducation: 1979 - Engineering diploma from Grenoble Institute of Technology. FRANCE. 1982 - PhD- Department of Chemistry, University of Southampton. Thesis entitled : Interfacial studies using drop image processing techniques. Positions : 1982 - 1984 SERC Research Fellow. University of Southampton. 1984 - 1985 CNRS Research Fellow. University of Southampton. 1985 - 1992 Lecturer in Physical Chemistry, University of Edinburgh. 1992 - Professor of Physical Chemistry, Ecole Polytechnique Fédérale de Lausanne. 2011 - 2014 Dean of Bachelor and Master studies Hubert Girault is the author of 2 textbooks, the co-author of about 600 scientific publications with more than 20'000 citations and the co-inventor of more than 15 patents. During his academic career, he has supervised 70 PhD students. 30 alumni of his laboratory are now Professors. Honours: Faraday medal 2006, Royal Society of Chemistry, Fellow of the International Society of Electrochemistry 2007, Reilley Award 2015. Fellow of the Electrochemical Society (USA), Shikata International medal, Polarography Society of Japan. Associate editor of Chemical Science
