Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Dieter DietzDieter Dietz has been educated at the Swiss Federal Institute of Technology in Zurich and has studied at the Cooper Union in New York City with Diller/Scofidio. He has received his degree in architecture in 1991 at ETH Zurich. He has worked with Diane Lewis Architects in New York and with Herzog & de Meuron in Basel. With partner architect Urs Egg he was a founding member of UNDEND Architecture in Zurich in 1997, an architectural practice with award winning entries in national and international competitions. Currently he is building up dieterdietz.org, a firm engaging in projects in urban design, media and architecture. From 1996 to 1999 Dieter Dietz has taught as Junior Faculty with Professor Marc Angélil at ETH Zurich. Since 2006 Dieter Dietz is Associate Professor for Architectural Design at EPFL in Lausanne and director of the ALICE laboratory in the ENAC faculty. He collaborates with the ALICE team on research projects at diverse scales with labs inside and outside EPFL. His teaching activities include the direction of the first year architectural design course as well as projects at master and thesis level.
Julien Lafontaine CarboniJulien Lafontaine Carboni is an architect. They graduated at ENSA Paris-Malaquais and currently pursues a PhD research at the ALICE Laboratory, EPFL. Julien published in several architectural, philosophical and anthropological journal such as Architecture and Culture, and Tabula Rasa. They investigates non-visual epistemologies to thread spatial histories. Bodies, gestures and words enact and perform spatialities, implying other forms of historicity concealed by the architectural disciplinarization. Thus, their aim is to replace architectural political agency in gestures themselves, while proposing a critical architectural historiography and theory.
Sandro CarraraSandro Carrara is an IEEE Fellow for his outstanding record of accomplishments in the field of design of nanoscale biological CMOS sensors. He is also the recipient of the IEEE Sensors Council Technical Achievement Award in 2016 for his leadership in the emerging area of co-design in Bio/Nano/CMOS interfaces. He is a Professor of the EPFL in Lausanne (Switzerland), and head of the "Bio/CMOS Interfaces" (BCI) research group. He is former professor of optical and electrical biosensors at the Department of Electrical Engineering and Biophysics (DIBE) of the University of Genoa (Italy) and former professor of nanobiotechnology at the University of Bologna (Italy). He holds a PhD in Biochemistry & Biophysics from University of Padua (Italy), a Master degree in Physics from University of Genoa (Italy), and a diploma in Electronics from National Institute of Technology in Albenga (Italy). His scientific interests are on electrical phenomena of nano-bio-structured films, and include CMOS design of biochips based on proteins and DNA. Along his carrier, he published 7 books, one as author with Springer on Bio/CMOS interfaces and, more recently, a Handbook of Bioelectronics with Cambridge University Press. He has more than 250 scientific publications and is author of 13 patents. He is now Editor-in-Chief of the IEEE Sensors Journal, the largest journal among 2019 IEEE publications; he is also founder and Editor-in-Chief of the journal BioNanoScience by Springer, and Associate Editor of IEEE Transactions on Biomedical Circuits and Systems. He is a member of the IEEE Sensors Council and his Executive Committee. He was a member of the Board of Governors (BoG) of the IEEE Circuits And Systems Society (CASS). He has been appointed as IEEE Sensors Council Distinguished Lecturer for the years 2017-2019, and CASS Distinguished Lecturer for the years 2013-2014. His work received several international recognitions: several Top-25 Hottest-Articles (2004, 2005, 2008, 2009, and two times in 2012) published in highly ranked international journals such as Biosensors and Bioelectronics, Sensors and Actuators B, IEEE Sensors journal, and Thin Solid Films; a NATO Advanced Research Award in 1996 for the original contribution to the physics of single-electron conductivity in nano-particles; six Best Paper Awards at the IEEE Sensors Conference 2019 (Montreal) in 2019, Conferences IEEE NGCAS in 2017 (Genoa), MOBIHEALTH in 2016 (Milan), IEEE PRIME in 2015 (Glasgow), in 2010 (Berlin), and in 2009 (Cork); three Best Poster Awards at the EMBEC Conference in 2017 (Tampere, Finland), Nanotera workshop in 2011 (Bern), and NanoEurope Symposium in 2009 (Rapperswil). He also received the Best Referees Award from the journal Biosensor and Bioelectronics in 2006. From 1997 to 2000, he was a member of an international committee at the ELETTRA Synchrotron in Trieste. From 2000 to 2003, he was scientific leader of a National Research Program (PNR) in the filed of Nanobiotechnology. He was an internationally esteemed expert of the evaluation panel of the Academy of Finland in a research program for the years 2010-2013. He has been the General Chairman of the Conference IEEE BioCAS 2014, the premier worldwide international conference in the area of circuits and systems for biomedical applications
Ralf SeifertRalf W. Seifert is Professor of Technology & Operations Management (TOM) at the College of Management of Technology (CDM) at Ecole Polytechnique Fédérale de Lausanne (EPFL) since 2003. His primary research and teaching interests relate to operations management, supply chain strategy and technology network management. He is also active in industry analysis, international project work and new venture formation.
Based on his work with companies, Professor Seifert has co-authored more than 30 case studies covering different industries. These efforts have been recognized by multiple international case awards granted by EFMD in 2018, 2012, 2009 and 2003, ECCH in 2011 and 2006, as well as POMS in 2004. He continues to actively research issues of supply chain strategy, supply chain finance and technology management and has more than 70 articles and international conference presentations to his credit. In addition, he co-authored two books: one focused on strategic supply chain management and another one concerning start-up challenges of technology ventures.
In parallel to his appointment at EPFL, he continues to serve a position at IMD, were he has been appointed Professor of Operations Management in 2000. Prior to joining IMD, Professor Seifert studied and worked in Germany, Japan and the US. He earned PhD and MS degrees in Management Science at Stanford University, a Diplom Ingenieur degree in Mechanical Engineering at the Karlsruhe Institute of Technology (KIT) and a Master's degree in Integrated Manufacturing Systems Engineering from North Carolina State University. While in the US, he consulted for Hewlett-Packard and served as Teaching and Research Assistant at Stanford University. In Germany he worked for Booz & Company, McKinsey & Company and Freudenberg & Co. In addition, he spent one year as a Visiting Scholar in Operations Research at Waseda University in Tokyo.
