Dot matrix printer
A dot matrix printer is an impact printer that prints using a fixed number of pins or wires. Typically the pins or wires are arranged in one or several vertical columns. The pins strike an ink-coated ribbon and force contact between the ribbon and the paper, so that each pin makes a small dot on the paper. The combination of these dots forms a dot matrix image. They were also known as serial dot matrix printers. While inkjet and laser printers technically exhibit dot matrix printing, they work differently than impact "dot matrix printers" and can deposit ink or toner at higher dot resolutions more quickly, with less inherent noise. The impact printer has the ability to make copies using multi-part forms, unlike an inkjet or laser printer. In the 1970s and 1980s, dot matrix impact printers were generally considered the best combination of cost and versatility, and until the 1990s were by far the most common form of printer used with personal and home computers. The first impact dot matrix printer was the Centronics 101. Introduced in 1970, it led to the design of the parallel electrical interface that was to become standard on most printers until it was displaced well over two decades later by the Universal Serial Bus (USB). Digital Equipment Corporation (DEC) was another major vendor, albeit with a focus on use with their PDP minicomputer line. Their LA30 30 character/second (CPS) dot matrix printer, the first of many, was introduced in 1970. In the mid-1980s, dot-matrix printers were dropping in price, and began to outsell daisywheel printers, due to their higher speed and versatility. Increased pincount of the printhead from 7, 8, 9 or 12 pins to 18, 24, 27, or 36 permitted superior print quality, which was necessary for success in Asian markets to print legible CJKV characters. Epson's 24-pin LQ-series rose to become the new de facto standard, at 24/180 inch (per pass – 7.5 lpi). Not only could a 24-pin printer lay down a denser dot-pattern in a single-pass, it could simultaneously cover a larger area and print more quickly.