Flat Earth

Flat Earth is an archaic and scientifically disproven conception of the Earth's shape as a plane or disk. Many ancient cultures subscribed to a flat-Earth cosmography. The idea of a spherical Earth appeared in ancient Greek philosophy with Pythagoras (6th century BC). However, most pre-Socratics (6th–5th century BC) retained the flat-Earth model. In the early 4th century BC, Plato wrote about a spherical Earth. By about 330 BC, his former student Aristotle had provided strong empirical evidence for a spherical Earth. Knowledge of the Earth's global shape gradually began to spread beyond the Hellenistic world. By the early period of the Christian Church, the spherical view was widely held, with some notable exceptions. It is a historical myth that medieval Europeans generally thought the Earth was flat. This myth was created in the 17th century by Protestants to argue against Catholic teachings. Despite the scientific fact and obvious effects o

Characterization of Grey Cast Iron-Steel Tribo-system under Starved Lubrication Conditions

Fatemeh Saeidi

Reducing friction and wear is essential for building efficient systems with low energy consumption and a long lifetime. Surface texturing is one of the methods to reduce friction and wear, especially in oil-lubricated systems. However, there is still a lack of knowledge about the fundamental aspects involved in the improvement of tribological performance, especially for the mechanical parts sliding under starved lubrication conditions. Moreover, failure in such lubricated contacts is poorly understood and there are little agreements regarding the mechanisms leading to scuffing. The present research focuses on three main objectives. The first is to characterize a cast iron-steel tribo-system under starved lubrication conditions, and to improve its tribological performance by laser surface texturing. All tribo-tests are performed using a flat-on-flat set-up with reciprocal movements. This set-up simulates specific industrial operating conditions of a semi-journal bearing used in a cutting machine. A Design of Experiments (DoE) approach is selected to investigate the effect of the different geometrical micro-texture parameters on the coefficient of friction (COF) and the lifetime of the cast iron samples. An optimum micro-texture geometry leading to a low COF and a long lifetime is determined based on a fractional factorial design. The second goal is to investigate the failure mechanisms of the selected tribo-pair. Failure of the tribo-system is characterized for both textured and un-textured surfaces. Scuffing is found to be the failure mechanism for the un-textured cast iron samples. For the textured cast iron samples, in contrast, two different failure mechanisms are observed depending on the distance between the micro-textures in direction of sliding (DMS). The textured surfaces with a DMS > 3.5 mm fail via the scuffing mechanism, whereas the surfaces with a DMS < 3 mm fail by a different mechanism named the oxidation mechanism. In contrary to the scuffing mechanism, the oxidation failure is found to be more a gradual failure. Based on the experimental observations, two hypotheses are suggested for the scuffing mechanism, and one for the oxidation mechanism. Finally, predicting the lifetime of a tribo-system is of the utmost importance to save costs. The DoE model developed for the lifetime was found to be a weak predictive model due to the sudden nature of scuffing. The accuracy of this model could only be improved by performing large statistics, which is not time and cost effective. Consequently, the last objective of this work is to employ an acoustic emission (AE) technique to detect precisely the surface state of our tribo-system. The application of wavelet packet decomposition, as an advanced signal processing method used for AE signals, is found to be promising for early detection of scuffing. The extension of this work using random forest regression shows the possibility of predicting scuffing 5 min before it occurs.

EPFL2016

AdS/QCD: the relevance of the geometry

Diego Becciolini, Michele Redi, Andrea Wulzer

We investigate the relevance of the metric and of the geometry in five-dimensional models of hadrons. Generically, the metric does not affect strongly the results and even flat space agrees reasonably well with the data. Nevertheless, we observe a preference for a decreasing warp factor, for example AdS space. The Sakai-Sugimoto model reduces to one of these models and the level of agreement is similar to the one of flat space. We also consider the discrete version of the five-dimensional models, obtained by dimensional deconstruction. We. find that essentially all the relevant features of "holographic" models of QCD can be reproduced with a simple 3-site model describing only the states below the cut-off of the theory.

2010

Characterization of Grey Cast Iron-Steel Tribo-system under Starved Lubrication Conditions

Fatemeh Saeidi

EPFL2016

Meshing of complex shapes in earth sciences

Characterization of Grey Cast Iron-Steel Tribo-system under Starved Lubrication Conditions

AdS/QCD: the relevance of the geometry

AdS/QCD: the relevance of the geometry

Characterization of Grey Cast Iron-Steel Tribo-system under Starved Lubrication Conditions

Meshing of complex shapes in earth sciences