Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Thierry MeyerThierry Meyer received in 1986 a diploma degree (MSc) in chemical engineering from the Swiss Federal Institute of Technology at Lausanne (EPFL). He was awarded in 1989 a PhD at EPFL for his thesis on micromixing in highly viscous polymeric media. He joined the Institute of Chemical Engineering from 1989 till 1993 as senior scientist in the field of polymerization reactions. In 1994 he joined Ciba-Geigy SA in the pigment division as successively development chemist, head of development a.i. and finally production manager for high performance pigments. Returning to the Institute of Chemical Engineering at EPFL in Lausanne by the end of 1998, he was nominated maître denseignement et de recherche (MER) for leading a new research group in the field of polymers and supercritical fluids, and teaching to chemists, chemical engineers and material sciences, disciplines as process development, introduction to chemical engineering, polymer and organic chemistry at master and bachelor program. In 2005 he owned the responsibility of the Occupational Health and Safety of the school of basic sciences on top of his research activities dealing with risk management and supercritical fluids. He is presently teaching introduction to chemical engineering at bachelor level, risk management at master level and specific courses on safety and engineering risk management in continuing education. He acts also as consultant and expert in risk assessment and chemical engineering matters by the ICC (International Chamber of Commerce) of the World Business Organization, by several consultancy companies and by major and SMEs chemical industries. Thierry Meyer is currently member of several international associations of the European Federation of Chemical Engineering, American institution of chemical engineering, American chemical society and senior member of the American Institute of Chemical Engineers. He was elected chairman of the European Working Party on Polymer Reaction Engineering from 2001 till 2006. He his currently the Swiss academic member of the European Working Party on Loss Prevention and Safety Promotion as well as of the European Working Party on Education. He is member of several editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Urs von StockarOriginaire de Zurich, Urs von Stockar est né en1942. Ingénieur chimiste diplômé de l'EPFZ en 1967, il y est ensuite assistant au Laboratoire de chimie technique et, en 1973, soutient sa thèse couronnée par la médaille d'argent de l'EPFZ.
De 1973 à 1976, il travaille au département de génie chimique de l'Université de Californie. Il y enseigne et participe au développement d'un procédé technique pour la conversion biologique de la cellulose en alcool.
En 1977, il est ingénieur chimiste chez Ciba-Geigy. Fin 1977 il est nommé professeur extraordinaire à l'EPFL. Il dirige l'Institut de génie chimique en 1978/79 et en 1989/90. Il est professeur ordinaire en 1982. En 1982/83 et 1993/95, il dirige le Département de chimie. Son enseignement et sa recherche traitent des opérations de transfert de masse et de la biotechnologie, il s'intéresse également aux questions de bioénergétique et de biothermodynamique. Collaborant avec l'UNIL et l'ISREC, son équipe développe des procédés de fabrication d'anticorps monoclônaux spéciaux, capables de protéger les muqueuses humaines. En 1990 il est nommé professeur associé à l'Université de Genève. Il représente la Suisse dans un groupe d'experts de la Fédération européenne de biotechnologie. Après avoir siégé pendant plusieurs années dans son Comité de direction, il a été nommé président de la Fédération Européenne de Biotechnologie pour la période 1996-97. Depuis 1991, il dirige le Comité de coordination suisse pour la biotechnologie.
Diploma in Chemical Eng.-1967-ETHZ, CH
Ph.D.-1972-ETHZ, CH
Postdoc. Fellow-1973-76-Univ. of California, Berkeley, US
Paul BowenDr. P. Bowen after gaining his BSc in Physics at Imperial College (UK), he obtained his Ph.D. in Physical Chemistry in the field of catalysis from the University of Cambridge, UK, in 1982, He then worked at the BP Research Centre, Sunbury, UK, for 4 years in applied surface sciences before moving to Switzerland and EPFL in 1987. He has been at the Powder Technology Laboratory, in the Materials Institute since its conception in 1988. He has over 190 publications and has written an undergraduate book on ceramic synthesis and processing. Education: 1976-1979 Imperial College of Science and Technology, University of London. B.Sc. Honours in Physics. 1979-1982 Department of Physical Chemistry, University of Cambridge. Certificate of Postgraduate Studies in Chemistry. Thesis: A Mössbauer Study of Some Clay Minerals and their Surfaces. Ph.D. in Physical Chemistry. Thesis: An Iron-57 and Tin-119 Mössbauer Spectroscopic Study of Some Graphite Intercalation Compounds and Carbon Supported Iron Catalysts. Professional Experience: 1983-1986 Research Scientist (Physical Chemist), New Technology Division, British Petroleum Company plc, BP Research Centre, Sunbury on Thames, Middlesex TW16 7LN, England. 1987-1988 Engineer, Ceramics Laboratory, Département des Matériaux, Ecole Polytechnique Fédérale de Lausanne, CH - 1015 Lausanne, Switzerland. 1988-2008 Research Associate/lecturer, Powder Technology Laboratory (Present) Institute des Matériaux, Ecole Polytechnique Fédérale de Lausanne, CH - 1015 Lausanne, Switzerland. 1988- 2015 Maitre DEnsiegnement et Recherche (Lecturer & Researcher), Powder Technology Laboratory, Institute des Matériaux, Ecole Polytechnique Fédérale de Lausanne,CH - 1015 Lausanne, Switzerland 2015 – present Adjunct Professor (Professeur Titulaire), Powder Technology Laboratory (LTP), Materials Institute, Ecole Polytechnique Fédérale de Lausanne (EPFL), CH - 1015 Lausanne, Switzerland
Jeremy Luterbacher
- Masters degree in Chemical Engineering obtained in 2007 at the Swiss Federal Institute of Technology, Lausanne (EPFL) (enrolled fall 2005, currently in 3rd semester). Relevant courses: Advanced Separation Processes, Advanced Chemical Reaction Engineering, Process Development and Polymer Chemistry and Macromolecular Engineering. - Bachelors degree in Chemistry and Chemical Engineering obtained in 2005 at the Swiss Federal Institute of Technology, Lausanne (EPFL). Relevant courses: Transport phenomena, Separation processes, Process command, Applied Energetics, Chemical Reaction Engineering, Chemical Kinetics, Quantum chemistry and Thermodynamics. - High school Maturity completed at the Nyon High School, 2002 (major subjects: biology-chemistry, advanced math, and Latin). Maturity essay completed 12-2001 with distinction - Secondary School certificate obtained in 1999 at the Gland secondary School, Latin-Greek section
