The Reduced-Moderation Water Reactor (RMWR), also referred to as the Resource-renewable BWR, is a proposed type of light water moderated nuclear power reactor, featuring some characteristics of a fast neutron reactor, thereby combining the established and proven technology of light water reactors with the desired features of fast neutron reactors. The RMWR concept builds upon the Advanced Boiling Water Reactor and is under active development in theoretical studies, particularly in Japan. Hitachi and the Japan Atomic Energy Agency are both involved in research.
Even in Generation II PWRs, the neutron spectrum is not fully thermalised. The goal of the RMWR is to depart further from the thermal neutron spectrum in order to achieve a breeder ratio of slightly greater than one, so that after the initial fuel charge no enrichment of the uranium input to the fuel cycle is required. The RMWR concept is dependent on nuclear fuel reprocessing in order to achieve its objective of a resource renewable fuel cycle. Hitachi has proposed the FLUOREX process as reprocessing technology for this purpose, instead of the more conventional Purex technology.
In contrast to regular light water reactors and in order to achieve a harder neutron spectrum, which is optimal for breeding purposes, the RMWR uses hexagonal fuel assemblies and Y-shaped control rods. The fuel is MOX (Mixed Oxide), consisting of 18% plutonium, which is surrounded by depleted uranium in the blanket region.
Another RMWR breeder design intends on closing the nuclear fuel cycle by mixing thorium with reprocessed transuranics, which include plutonium, in a thorium containing MOX fuel. The neutron speed would be in the spectrum that could purportedly transmutate the long-lived fission products like Tc-99 & I-127 and as the neutron spectrum is hard/fast enough, to also be capable of burning the usually troublesome minor actinides quite efficiently.
Hitachi announced a collaboration with three U.S. universities on the development of the RBWR/RMWR in 2014.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
In this course, one acquires an understanding of the basic neutronics interactions occurring in a nuclear fission reactor as well as the conditions for establishing and controlling a nuclear chain rea
The supercritical water reactor (SCWR) is a concept Generation IV reactor, designed as a light water reactor (LWR) that operates at supercritical pressure (i.e. greater than 22.1 MPa). The term critical in this context refers to the critical point of water, and must not be confused with the concept of criticality of the nuclear reactor. The water heated in the reactor core becomes a supercritical fluid above the critical temperature of 374 °C, transitioning from a fluid more resembling liquid water to a fluid more resembling saturated steam (which can be used in a steam turbine), without going through the distinct phase transition of boiling.
Generation IV reactors (Gen IV) are nuclear reactor design technologies that are envisioned as successors of generation III reactors. The Generation IV International Forum (GIF) - an international organization that coordinates the development of generation IV reactors - specifically selected six reactor technologies as candidates for generation IV reactors. The designs target improved safety, sustainability, efficiency, and cost.
A boiling water reactor (BWR) is a type of light water nuclear reactor used for the generation of electrical power. It is the second most common type of electricity-generating nuclear reactor after the pressurized water reactor (PWR), which is also a type of light water nuclear reactor. The main difference between a BWR and PWR is that in a BWR, the reactor core heats water, which turns to steam and then drives a steam turbine. In a PWR, the reactor core heats water, which does not boil.
Explores neutron moderation, absorption, resonance scattering, and energy discretization in reactors, emphasizing the trade-offs between computational efficiency and accuracy.
Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...
Decay heat calculations of spent nuclear fuel (SNF) using Polaris and ORIGEN codes in the SCALE code sys-tem, and CASMO5 code, are validated using measurements from the Clab and GE-Morris facilities. Multiple hypothesis testing, relying on permutations and ...
PERGAMON-ELSEVIER SCIENCE LTD2022
The EUROfusion Consortium established in 2014 and composed by European Fusion Laboratories, and in particular the Power Plant Physics and Technology department aims to develop a conceptual design for the Fusion DEMOnstration Power Plant, DEMO. With respect ...