Christof HolligerOriginaire d'Adliswil, Christof Holliger est né en 1959. Diplômé de l'ETHZ en biologie en 1984, il mène des travaux de recherche dans le domaine de la microbiologie environnementale à l'Université d'Agriculture de Wageningen (Pays-Bas) où il obtient son doctorat en Science de l'environnement en 1992. En 1992, il retourne en Suisse engagé comme collaborateur scientifique et chef de groupe à l'Institut Fédéral pour l'Aménagement, l'Epuration et la Protection des Eaux (EAWAG) à Kastanienbaum. Il y continue ses recherches sur la déchloruration réductrice, commencées aux Pays-Bas, et dirige des travaux sur la réduction des composés nitroaromatiques, la réduction du fer et la méthanogenèse psychrophile dans les sédiments des lacs. En octobre 1998, il est nommé professeur assistant en biotechnologie environnementale au Département de génie rural de l'EPFL. Ses recherches visent l'application des micro-organismes anaérobies pour le traitement des eaux résiduaires. En novembre 2004, il est nommé professeur associé et devient responsable du laboratoire de biotechnologie environnementale à la Faculté de l'Environnement naturel, architectural et construit. L'utilisation des techniques de la biologie moléculaire pour la caractérisation des communautés microbiennes impliquées dans le biotraitement de l'air, des eaux et des sols pollués est un outil clé dans les différents projets de recherche visants le développement des nouveaux procédés de traitement.
Thierry MeyerThierry Meyer received in 1986 a diploma degree (MSc) in chemical engineering from the Swiss Federal Institute of Technology at Lausanne (EPFL). He was awarded in 1989 a PhD at EPFL for his thesis on micromixing in highly viscous polymeric media. He joined the Institute of Chemical Engineering from 1989 till 1993 as senior scientist in the field of polymerization reactions. In 1994 he joined Ciba-Geigy SA in the pigment division as successively development chemist, head of development a.i. and finally production manager for high performance pigments. Returning to the Institute of Chemical Engineering at EPFL in Lausanne by the end of 1998, he was nominated maître denseignement et de recherche (MER) for leading a new research group in the field of polymers and supercritical fluids, and teaching to chemists, chemical engineers and material sciences, disciplines as process development, introduction to chemical engineering, polymer and organic chemistry at master and bachelor program. In 2005 he owned the responsibility of the Occupational Health and Safety of the school of basic sciences on top of his research activities dealing with risk management and supercritical fluids. He is presently teaching introduction to chemical engineering at bachelor level, risk management at master level and specific courses on safety and engineering risk management in continuing education. He acts also as consultant and expert in risk assessment and chemical engineering matters by the ICC (International Chamber of Commerce) of the World Business Organization, by several consultancy companies and by major and SMEs chemical industries. Thierry Meyer is currently member of several international associations of the European Federation of Chemical Engineering, American institution of chemical engineering, American chemical society and senior member of the American Institute of Chemical Engineers. He was elected chairman of the European Working Party on Polymer Reaction Engineering from 2001 till 2006. He his currently the Swiss academic member of the European Working Party on Loss Prevention and Safety Promotion as well as of the European Working Party on Education. He is member of several editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Manuel Alexandre PouchonResearcher in experimental and theoretical materials science, specializing in the development of nuclear fuels since 1997, and structural materials for nuclear reactors since 2004. Presently leading nuclear materials lab (LNM) and the advanced nuclear materials (ANM) group and programme at the Paul Scherrer Institute (PSI) in Switzerland. The applicability of different material candidates in advanced nuclear reactors is researched. Especially different aspects of radiation damage are investigated. For this purpose the concept of sample miniaturization is applied and further developed. Recently leading a new activity in particle fuel production and application. Previously working for the FUJI project at PSI, where different nuclear fuel forms for fast reactors were produced, characterized and finally irradiated in reactor. This work was performed in collaboration with the Japan Nuclear Cycle Development Institute (JNC) and Nuclear Research & consultancy Group (NRG) in the Netherlands. Previously an International Fellow at JNC investigating the thermal conductivity, sintering behaviour, and mechanical interaction of ceramic-sphere fuel beds; this includes the use of finite element methods for simulating various behaviours. Previously at the Paul Scherrer Institute (PSI) and for the Inert Matrix Fuel Project for burning plutonium in light water reactors, investigating the thermal conductivity and the diffusion and solubility of fission products of a zirconia-based non-fertile matrix.
John Richard ThomeJohn R. Thome is Professor of Heat and Mass Transfer at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland since 1998, where his primary interests of research are two-phase flow and heat transfer, covering both macro-scale and micro-scale heat transfer and enhanced heat transfer. He directs the Laboratory of Heat and Mass Transfer (LTCM) at the EPFL with a research staff of about 18-20 and is also Director of the Doctoral School in Energy. He received his Ph.D. at Oxford University, England in 1978. He is the author of four books: Enhanced Boiling Heat Transfer (1990), Convective Boiling and Condensation, 3rd Edition (1994), Wolverine Engineering Databook III (2004) and Nucleate Boiling on Micro-Structured Surfaces (2008). He received the ASME Heat Transfer Division's Best Paper Award in 1998 for a 3-part paper on two-phase flow and flow boiling heat transfer published in the Journal of Heat Transfer. He has received the J&E Hall Gold Medal from the U.K. Institute of Refrigeration in February, 2008 for his extensive research contributions on refrigeration heat transfer and more recently the 2010 ASME Heat Transfer Memorial Award. He has published widely on the fundamental aspects of microscale and macroscale two-phase flow and heat transfer and on enhanced boiling and condensation heat transfer.
Christos ComninellisChristos Comninellis, of Greek origin, born in 1945, received his Bachelor of Science in chemistry (distinction with honor) in 1970 from the University of Alexandria.
From 1971 to 1975, he worked as a chemist at the Institute of chemical engineering at the EPFL, where he achieved his PhD in technical sciences in 1979 for his research on the electrochemical fluorination of organic compounds in anhydrous hydrogen fluoride.
Appointed professor in 1996, he teaches at the Faculty of Basic Sciences (FSB) of the Swiss Federal Institute of Technology, Lausanne (EPFL)
Applied Chemistry.
Transport Phenomena.
Chemical and Electrochemical Technologies Related to the Environment.
Electrochemical Engineering.
He also holds a teaching position at the Haute Ecole Valaisanne Sion (HEVs).
His research work is focused on environmental electrochemistry, electrocatalysis, fuel cell and electrochemical promotion in catalysis. An applied research for the utilization of electrochemical techniques in industry for the protection of the environment is a constant concern within his activities. As a result, the collaboration with the industry enabled the development of oxidation processes with regeneration of the oxidant using a new type of bipolar electrochemical reactor.
Christos Comninellis has published over 170 scientific papers, directed 17 doctoral theses and holds 14 patents. He has participated in over 130 international symposia, giving five plenary lectures during the last five years. He has been president of the Evaluation Committee of the FSB since the beginning of 2004 and is member of the jury of the EPFL prize for outstanding PhD-thesis.
Urs von StockarOriginaire de Zurich, Urs von Stockar est né en1942. Ingénieur chimiste diplômé de l'EPFZ en 1967, il y est ensuite assistant au Laboratoire de chimie technique et, en 1973, soutient sa thèse couronnée par la médaille d'argent de l'EPFZ.
De 1973 à 1976, il travaille au département de génie chimique de l'Université de Californie. Il y enseigne et participe au développement d'un procédé technique pour la conversion biologique de la cellulose en alcool.
En 1977, il est ingénieur chimiste chez Ciba-Geigy. Fin 1977 il est nommé professeur extraordinaire à l'EPFL. Il dirige l'Institut de génie chimique en 1978/79 et en 1989/90. Il est professeur ordinaire en 1982. En 1982/83 et 1993/95, il dirige le Département de chimie. Son enseignement et sa recherche traitent des opérations de transfert de masse et de la biotechnologie, il s'intéresse également aux questions de bioénergétique et de biothermodynamique. Collaborant avec l'UNIL et l'ISREC, son équipe développe des procédés de fabrication d'anticorps monoclônaux spéciaux, capables de protéger les muqueuses humaines. En 1990 il est nommé professeur associé à l'Université de Genève. Il représente la Suisse dans un groupe d'experts de la Fédération européenne de biotechnologie. Après avoir siégé pendant plusieurs années dans son Comité de direction, il a été nommé président de la Fédération Européenne de Biotechnologie pour la période 1996-97. Depuis 1991, il dirige le Comité de coordination suisse pour la biotechnologie.
Diploma in Chemical Eng.-1967-ETHZ, CH
Ph.D.-1972-ETHZ, CH
Postdoc. Fellow-1973-76-Univ. of California, Berkeley, US
