Concept

Vignetting

Related publications (26)

Practical computational imaging by use of spatiotemporal light modulation: from simulations to applications in biological microscopy

Optical microscopy is an essential tool for biologists, who are often faced with the need to overcome the spatial and temporal resolution limitations of their devices to capture finer details. As upgrading imaging hardware is expensive, computational metho ...

EPFL2023

Phase calibration of a basic bright-field microscope for 3D metrology of transparent samples at the nanoscale

Martinus Gijs, Daniel Migliozzi, Bingying Zhao

Optical retrieval of the structure of transparent objects at the nano-scale requires adapted methods capable of probing their interaction with suitable light. Scattering events, for instance, depend on the content and the arrangement of the medium encounte ...

SPIE-INT SOC OPTICAL ENGINEERING2021

3D nanometrology of transparent objects by phase calibration of a basic bright-field microscope for multiple illumination apertures

Martinus Gijs, Daniel Migliozzi, Bingying Zhao

Optical retrieval of the structure of transparent objects at the nanoscale requires adapted techniques capable of probing their interaction with light. Here, we considered a method based on calibration of the defocusing with partially coherent illumination ...

2020

Optical characterization of high numerical aperture microlenses for quality assessment and fabrication process optimization

Toralf Scharf, Wilfried Noell, Jeremy Béguelin

Accurate characterization of high numerical aperture aspheric microlenses currently is a nonstandard procedure that remains an open challenge. Here, we present and discuss a characterization method based on interferometric and point spread function measure ...

OPTICAL SOC AMER2020

Three-dimensional tomography of red blood cells using deep learning

Demetri Psaltis, Joowon Lim, Ahmed Ayoub

We accurately reconstruct three-dimensional (3-D) refractive index (RI) distributions from highly ill-posed two-dimensional (2-D) measurements using a deep neural network (DNN). Strong distortions are introduced on reconstructions obtained by the Wolf tran ...

2020

Analysis of the outer divertor hot spot activity in the protection video camera recordings at JET

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Alessandro Pau, Cristian Sommariva, Henri Weisen, Richard Pitts, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov, Federico Nespoli, Yao Zhou, David Pfefferlé, Davide Galassi, Antonio José Pereira de Figueiredo, Jonathan Marc Philippe Faustin, Liang Yao, Dalziel Joseph Wilson, Hamish William Patten, Samuel Lanthaler, Bernhard Sieglin, Otto Asunta

Hot spots on the divertor tiles at JET result in overestimation of the tile surface temperature which causes unnecessary termination of pulses. However, the appearance of hot spots can also indicate the condition of the divertor tile surfaces. To analyse t ...

2019

Spatial coherence properties of an LED-based illumination system for mask-aligner lithography

Hans Peter Herzig, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

A high-power LED-based illumination system has been developed as a replacement for the mercury arc lamps used in mask-aligner lithography. LEDs are arranged in a grid array and placed in the entrance aperture of individual reflectors. Those reflectors decr ...

SPIE2019

High power modular LED-based illumination system for lithography applications

Hans Peter Herzig, Marcel Groccia, Toralf Scharf, Wilfried Noell, Raoul Kirner, Johana Bernasconi

Mask-aligner lithography is a technology used to transfer patterns with critical dimensions in the micrometer range from below 1 micron for contact printing to a dozen of microns in proximity printing. This technology is widely used in the fabrication of M ...

2018

Flat lensless phase imager

Christophe Moser, Manon Rostykus

Lensless imaging refers to an imaging technique which requires no imaging element between the light transmitted by the sample and the camera. This configuration enables designing compact devices. In the visible range, it is mainly investigated for microsco ...

Spie-Int Soc Optical Engineering2016

Coherence management in lithography printing systems

Hans Peter Herzig, Toralf Scharf, Johana Bernasconi

In proximity lithography, interference and diffraction effects arise when printing small features because of the proximity gap. Different techniques are used in order to control and take advantage of theses effects. In this paper, the focus is set on the M ...

Spie-Int Soc Optical Engineering2016

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.