Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The damping properties of unidirectional, 0/90 and twill 2/2 flax fibre (FF) reinforced epoxy composites containing 40 vol% of fibres have been measured by vibration beam testing (VBT). The influence of the impregnation quality, the fibre/matrix adhesion, ...
Fluorine-doped tin oxide (FTO) films were deposited on float glass to create low-emissivity glass (low-E glass) by atmospheric pressure chemical vapor deposition (APCVD). Heat treatments were carried out to assess its antioxidant properties. The surface mo ...
This paper presents the results of long term experiments of four point bending test with structural laminated glass plates. For experiments 6 mm thick annealed Soda-Lime-Silica Glass and three different interlayer laminates were used: Polyvinyl butyral (PV ...
The present work critically reviews the scientific and patent literature on low-melting bismuth-based oxide glass frits in materials for electronics, sensors and related applications such as sealing glasses, solar cells, architectural and automotive glass, ...
We present the experimental phase diagram of LiHoxEr1-xF4, a dilution series of dipolar-coupled model magnets. The phase diagram was determined using a combination of ac susceptibility and neutron scattering. Three unique phases in addition to the Ising fe ...
This paper discusses two projects on post-tensioned glass beams, performed at EPFL and DTU, respectively. In these projects small scale glass beams (length of 1.5m and 1m) are post-tensioned by means of steel threaded rods tensioned at the beam ends. The p ...
During their lifetime, glass panels are repetitively exposed to thermal stresses. These thermal stresses result from temperature differences within the panel, which most notably cause the edges of the panels to be stressed in tension. When these thermal st ...
A precise estimation of the edge strength becomes an important issue when designing structural glass beams or façade mullions. However, in literature, the glass edge strength is poorly documented compared to the surface strength. In particular, the experim ...
This paper focuses on the numerical modelling of SentryGlas-laminated reinforced glass beams. In these beams, which have been experimentally investigated in preceding research, a stainless steel reinforcement section is laminated at the inner recessed edge ...
Supercooled liquids are characterized by their fragility: The slowing down of the dynamics under cooling is more sudden and the jump of specific heat at the glass transition is generally larger in fragile liquids than in strong ones. Despite the importance ...