Concept

Reciprocating compressor

Related publications (17)

Increasing the Energy Efficiency of Gas Boosters for Hydrogen Storage and for Refueling Stations

A new electrically driven gas booster is described as an alternative to the classical air-driven gas boosters known for their poor energetic efficiency. These boosters are used in small scale Hydrogen storage facilities and in refueling stations for Hydrog ...

MDPI2023

Real-time optimization of load sharing for gas compressors in the presence of uncertainty

Dominique Bonvin, Timm Faulwasser, Alejandro Gabriel Marchetti, Predrag Milosavljevic

This paper investigates the problem of load-sharing optimization of gas compressors in the presence of uncertainty. The objective is to operate a set of compressor units in an energy-efficient way, while at the same time meeting a varying load demand. The ...

ELSEVIER SCI LTD2020

The Role of Reynolds Number Effect and Tip Leakage in Compressor Geometry Scaling at Low Turbulent Reynolds Numbers

Jürg Alexander Schiffmann, Markus Diehl, Christoph Schreiber

In compressor design, a convenient way to save time is to scale an existing geometry to required specifications, rather than developing a new design. The approach works well when scaling compressors of similar size at high Reynolds numbers but becomes more ...

2020

Impact of large tip clearance ratios on the performance of a centrifugal compressor

Jürg Alexander Schiffmann, Markus Diehl

Ultra-compact and fast spinning turbomachinery is a key technology to increase performance of domestic heating applications and to address decentralization of power and heat as a consequence of the rise of renewable energy sources. Recently, a heat pump us ...

2019

Data-Driven Predesign Tool for Small-Scale Centrifugal Compressor in Refrigeration

Jürg Alexander Schiffmann, Cyril Picard, Violette Mounier

Domestic scale heat pumps and air conditioners are mainly driven by volumetric com-pressors. Yet the use of reduced scale centrifugal compressors is reconsidered due to their high efficiency and power density. The design procedure of centrifugal compressor ...

2018

High temperature heat pump using HFO and HCFO refrigerants – System design, simulation, and first experimental results

Jürg Alexander Schiffmann

High temperature heat pumps (HTHPs) with heat sink temperatures in the range of 100 to 160°C are expected to become increasingly commercialized in the coming years. Major applications have been identified, particularly in the food, paper, metal and chemica ...

2018

Small, High-Speed, Oil-Free Radial Turbo-compressors for Cooling Applications: Refrigerant Selection

Jürg Alexander Schiffmann

Emerging energy-efficient, oil-free radial centrifugal compressors seem promising for small to mid-capacity air conditioning and refrigeration applications. Compressor design must balance trade-offs among impeller diameter, bearing type, and refrigerant se ...

2018

ORC Driven Heat Pump Running on Gas Bearings for Domestic Applications: Proof of Concept and Thermo-Economic Improvement Potential

Jürg Alexander Schiffmann, Violette Mounier

ORC driven Heat Pumps (HP-ORC) offer a promising technology of thermally driven heat pumps (TDHPs) for domestic applications. Recently, a 40 kW HP-ORC unit based on gas supported turbomachinery has been investigated in which the ORC radial turbine drives t ...

2017

Theoretical Study of a Novel Oil-Free Co-Rotating Scroll Compressor Integrated into a Hybrid Absorption Heat Pumps

Jürg Alexander Schiffmann, Luis Carlos Mendoza Toledo

Hybrid absorption heat pumps (Osenbrück cycle and Hybrid wet compression cycle) are known for high temperature lifts, low-pressure ratios and wide capacity control. They are well suited for processes with the occurrence of significant heat sink and heat so ...

2016

Energetic Macroscopic Representation of A Linear Reciprocating Compressor Model

Alfred Rufer, François Gallaire, Philippe Barrade, Mahbod Heidari

This article introduces the energetic macroscopic representation (EMR) as approach for the dynamic nonlinear modeling of a reciprocating air compressor. EMR has been introduced recently for research development in complex electromechanical systems and is b ...

Elsevier2015

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.