Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The Laboratory of Industrial Energy systems has evaluated a series of high performance air-water heat pump concepts with the aim to retrofit existing fuel fired boilers for residential hydronic heating systems. The results are published within the framewor ...
The objectives of the present work is to theoretically and experimentally demonstrate the advantages of a two-stage cycle equipped with an economizer and single variable speed compressor for heat pumps using air as cold source. Furthermore, an efficient de ...
The project High Temperature Heat Pump has been completed in 2 phases. First a new type of scroll compressor with adapted injection port for vapor injection, was tested with an air-water heat pump (fig 2.2, 2.3). This type of heat pump reaches the extreme ...
This project is evaluating a heat pump cycle with midstage injection at scroll compressors. The injected refrigerant is evaporated partially by an internal heat exchanger (fig. 2.1). A glycol-water heat pump with 12 kW heat capacity at B-5/W50 was built an ...
This paper discusses the choice and implementation of bearings for oil-free compressors where the system refrigerant is used as the lubricant in externally pressurised and hybrid bearings. The problems of oil contamination in heat pump application is descr ...
This paper describes a 1 to 3.5 kWe hermetic scroll expander generator modified from a standard hermetic compressor, an organic Rankine cycle test facility built to test expanders up to 10 kWe and a set of experimental results using HFC 134a in the dry vap ...
A new type of air-water heat pump has been developed with the aim to cover an extended application range in high temperature residential heating (for retrofitting existing oil or gas boilers in hydronic heating systems). The base heat output is about 10 kW ...