Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We present a methodology for calibrating the thermoelastic properties of constituent tows in a woven C/SiC composite using a combination of experimental measurements and finite element simulations of strain distributions that arise upon heating. Because of ...
Constitutive models for fiber-reinforced ceramic-matrix composites (CMCs) are needed to enable implementation of these materials in future engineering systems. One such constitutive model, developed by Genin and Hutchinson [1], is based on a phenomenologic ...
We present a methodology for determining stress distributions ahead of blunt notches in plates of fiber-reinforced ceramic–matrix composites subject to uniaxial tensile loading, accounting for the effects of inelastic straining due to matrix cracking. The ...
Three different carbon fiber-reinforced polymer (CFRP) systems were used to reinforce new or strengthen existing concrete slabs against punching. Untensioned CFRP plates or only very low prestressed CFRP straps could not prevent brittle punching failure. S ...
The environmental benefits of recycling are assessed against other end-of-life (EOL) treatments for Carbon Fibre Reinforced Plastic (CFRP) waste. Recycling via pyrolysis, incineration with energy recovery, and disposal via landfilling are compared. To acco ...
The effect of titanium additions on the interface and mechanical properties of infiltrated Cu8 wt%Al-Al2O3 composites containing 57 +/- 2 vol% ceramic are investigated, exploring two different Al2O3 particle types and four different Ti concentrations (0, 0 ...
The performance of fibre reinforced plastic (FRP) materials used for external strengthening depends strongly on the bond behaviour at the FRP-substrate interface. In this paper, the results of an analytical model and of two Finite Element (FE) models (bi-a ...
The mechanics of cracking in fiber-reinforced ceramic matrix composites (CMCs) under general loadings remains incomplete. The present paper addresses one outstanding aspect of this problem: the development of matrix cracks in unidirectional plies under she ...
The mechanical and damping properties of unidirectional (UD) and twill 2/2 flax fibre (FF) reinforced thermoset (epoxy) and thermoplastic (polypropylene (PP) and polylactic acid (PLA)) composites containing 40 vol% of fibres have been compared with those o ...
