Boiling water reactor | EPFL Graph Search

A boiling water reactor (BWR) is a type of light water nuclear reactor used for the generation of electrical power. It is the second most common type of electricity-generating nuclear reactor after the pressurized water reactor (PWR), which is also a type of light water nuclear reactor. The main difference between a BWR and PWR is that in a BWR, the reactor core heats water, which turns to steam and then drives a steam turbine. In a PWR, the reactor core heats water, which does not boil. This hot water then exchanges heat with a lower pressure system, which turns water into steam that drives the turbine. The BWR was developed by the Argonne National Laboratory and General Electric (GE) in the mid-1950s. The main present manufacturer is GE Hitachi Nuclear Energy, which specializes in the design and construction of this type of reactor. Overview A boiling water reactor uses demineralized water as a coolant and neutron moderator. Heat is produced by nuclear fission in th

Delayed Hydride Cracking in Irradiated and Unirradiated Zircaloy-2 Cladding

Aaron William Colldeweih

Zirconium alloys used in the nuclear industry are exposed to extreme conditions undergoing high levels of irradiation damage and corrosion. Zircaloy-2 is used as nuclear fuel cladding in boiling water reactors and for the encapsulation of the spallation target in the neutron source SINQ at the Paul Scherrer Institute. As a result of oxidation, hydrogen is produced and partially taken up into the zirconium matrix. As the hydrogen reaches the solubility limit, it precipitates in the form of a zirconium hydride. A number of deleterious effects of hydrides have been extensively studied, including the embrittlement of the material and a unique cracking phenomenon, namely delayed hydride cracking (DHC). DHC occurs as hydrogen in solid solution diffuses towards locations of higher tensile stress, where it subsequently precipitates as the local solvus limit is reached. Once the hydride grows to a critical size, it fractures, which can continue to propagate in repeated steps by the same mechanism.Several studies have been performed in order to understand properties of DHC based on parameters like, alloy type, cracking temperature, hydrogen content, and cracking direction. The most important mechanical properties include the fracture toughness and cracking velocity, which governs the material failure conditions. Crystallographic properties have been investigated in order to understand how complex hydride precipitation develops within the context of DHC conditions. In this project, radial DHC is explored in irradiated and unirradiated thin-walled Zircaloy-2 nuclear fuel cladding with and without an inner liner, in addition to spallation target rod material. A unique three-point bending test, applicable also for irradiated samples in the hotlab, was developed to induce a consistent radially propagating outside-in crack. Results have provided insight into the effects of the inner liner on cracking velocity, showing correlations with the hydrogen depletion. The combined DHC and creep mechanisms, which cannot be decoupled, is coined as âcreep-delayed hydride crackingâ. As the initiating conditions for DHC are of great technical importance, the threshold stress intensity factor has been investigated, under ideal DHC conditions, where a minimum value occurs around 6 MPaâm. Quantitative analysis of the hydrogen distribution around the tip of an arrested DHC crack tip has been performed with neutron radiography at the SINQ. Trends show that the hydrogen concentration around the crack tip increases with temperature resulting likely from the larger hydrogen diffusion, and that the liner reduces the hydrogen available for DHC. Crystallographic analysis has provided insight on the hydride phases responsible for DHC with synchrotron micro X-ray diffraction, performed at the Swiss Light Source at PSI. The results directly suggest that the Î³-hydride is a stable phase precipitated at low temperatures. Testing of irradiated material provided insight into the crack initiation of DHC as a result of the strongly irregular outer surface generated from the oxidation. The propagation pattern is highly irregular compared to the unirradiated material due to the embrittled nature of the cladding from irradiation damage.

EPFL2022

Appraisal of Core Analysis Methods against Zero-Power Experiments on Full-Scale BWR Fuel Assemblies

Flavio Dante Giust

The present doctoral research aims at the appraisal of nodal core simulators used for the calculation of commercial boiling water reactor (BWR) cores, against measurements carried out at the Paul Scherrer Institute under the LWR-PROTEUS experimental programme. The research focuses mainly on the prediction of radial and axial total-fission rate (i.e. power) distributions in the vicinity of core heterogeneities, caused by features such as the presence of control blades, enrichment boundaries or partial length rods. As such, this thesis complements previous validation work performed for LWR calculational methods on the basis of integral experiments in zero-power research reactors, the latter corresponding largely to the validation of two-dimensional, reflected fuel-assembly calculations. Two commercial code systems have been investigated currently: HELIOS/PRESTO-2, presently used for core monitoring at the Leibstadt Nuclear Power Plant (Switzerland), and CASMO-5/SIMULATE-5, which represents the most recent generation of the widely applied CASMO/SIMULATE system. Six different LWR-PROTEUS configurations have been modelled, for which the nodal reconstructed total-fission rate distributions have been compared against experimental results, as well as against reference, three-dimensional whole-reactor Monte Carlo calculations using the MCNPX code. To start with, a methodology has been developed and tested for appropriate representation of the multi-zone experimental configurations, as employed in the LWR-PROTEUS programme, by means of reduced-geometry models set up using the investigated nodal code systems. The approach adopted has been to apply, in each case, case-dependent three-dimensional boundary conditions to the nodal code's modelling of the 3x3 array of BWR assemblies constituting the LWR-PROTEUS test zone. This has been done in terms of so-called Partial Current Ratios (PCRs), which describe the relation between the incoming and outgoing neutron currents across the test-zone boundary. These PCRs have been derived from the fore-mentioned MCNPX calculation of the multi-zone PROTEUS reactor, thus allowing for the adequate description of the three-dimensional effects associated with the interaction between the test zone and its surroundings. The results obtained for the reference LWR-PROTEUS configuration, with a test zone consisting of an unperturbed regular array of identical, axially uniform BWR fuel assemblies (of type SVEA-96+), showed that both the investigated nodal methodologies reproduce the experimental total-fission rate distribution with very good accuracy, equivalent to that achievable with high-order transport calculations. This has provided adequate indication that the developed methodology of using three-dimensional PCRs, calculated by means of an appropriate whole-reactor MCNPX model, offers a reliable platform for the desired validation. The full insertion of a L-shaped hafnium control blade, especially fabricated for the LWR-PROTEUS programme, has permitted the study of the behaviour of calculated total-fission rate distributions in the presence of strong radial and azimuthal flux gradients. In this case, the use of reflective boundary conditions in the lattice calculations, combined with the azimuthal non-uniformity of the currents that couple the test zone with the outer zones of the reactor, produce systematic deviations which, together, lead to some loss of accuracy in comparison with the regular, uncontrolled case. The three-dimensional effects of the changes in enrichment and gadolinium content between two different axial sections of the fuel assembly have also been studied. In this case, the calculations of the axial total-fission rate distributions are seen to generally reproduce the experimental data with good accuracy, although certain systematic effects are observed. In particular, at local level, and very near the strong axial heterogeneity caused by the enrichment boundary, relatively large deviations have been found to occur. However, due to their very local character, these deviations are not considered to represent a relevant issue in connection with power reactor monitoring and design. Also for the demanding case of the LWR-PROTEUS configuration with a partially inserted control blade, the results obtained in this thesis show a very good behaviour. As in the boundary enrichment case, however, some very localized deviations occur in the vicinity of the strong axial flux gradients. In a separate phase of the LWR-PROTEUS programme, BWR assemblies with partial length rods (PLRs), viz. of type SVEA-96 Optima2, were studied in the central test zone. The results of the comparisons made currently for the corresponding LWR-PROTEUS configurations have shown that, also for fuel assemblies with axial heterogeneities of this type, the performance of both the investigated nodal methodologies is very satisfactory for predicting the global distribution of the total-fission rate. The local three-dimensional effects caused by the PLRs are also predicted with good accuracy, similar, in fact, to that obtained with high-order three-dimensional transport calculations. The present research shows that the two nodal code systems investigated – HELIOS/PRESTO-2 and CASMO-5/SIMULATE-5 – reproduce the LWR-PROTEUS experimental results with high accuracy, both for the radial and the three-dimensional (i.e. at pellet level) comparisons. Significant deviations occur almost exclusively within a short distance from the nodal interface, in cases featuring strong gradients across the core midplane. The axial and radial shapes of the total-fission rate distributions are well predicted in most cases, which represents an important observation concerning the monitoring of operational limits in power reactor cores. Thus, overall – within the range of applicability of the experimental conditions studied in the LWR-PROTEUS programme – the results of the comparisons performed in this thesis confirm that nodal methodologies with pin-power reconstruction have a very high level of performance. In fact, the accuracy that they can achieve for the assembly-internal total-fission rate distribution is, in general, higher than that practically achievable in an operating nuclear power plant. This is due to unavoidable, additional uncertainties in the characterisation of a BWR core under power reactor conditions. Finally, the present research has provided quantitative insights into the applicability of integral data, produced in critical facilities such as PROTEUS, for validating the calculation of power-reactor core heterogeneities. One has thus been able to demonstrate that the experimental evidence from the LWR-PROTEUS programme indeed constitutes a very valuable basis for the validation and appraisal of three-dimensional nodal methodologies with pin-power reconstruction.

EPFL2012

Extension of the nodal code DYN3D to SFR applications

Evgeny Nikitin

DYN3D is a well-established Light Water Reactor (LWR) simulation tool and is being extended for safety analyses of Sodium cooled Fast Reactors (SFRs) at the Helmholtz-Zentrum Dresden-Rossendorf. This thesis focuses on the first stage of the development process, that is, the extension and application of DYN3D for steady-state and transient SFR calculations on reactor core level. In contrast to LWRs, the SFR behavior is especially sensitive to thermal expansions of the reactor components. Therefore, a new thermal-mechanical module accounting for thermal expansions is implemented into DYN3D. At first step, this module is capable of treating two important thermal expansion effects occurring within the core, namely axial expansion of fuel rods and radial expansion of diagrid. In order to perform nodal calculations with DYN3D, pre-generated homogenized few-group cross sections (XS) are necessarily needed. Therefore, prior to the development of thermal expansion models, a general methodology for XS generation is established for SFR nodal calculations based on the use of the Monte Carlo code Serpent. The new methodological developments presented in this thesis are verified against the Monte Carlo solutions of Serpent. Two SFR cores are used for testing: the large oxide core of the OECD/NEA benchmark and a smaller core from the Phenix end-of-life tests. Finally, the extended DYN3D is validated against selected IAEA benchmark tests on the Phenix end-of-life experiments that contain both steady-state and transient calculations. The contribution to the SFR-related developments at the HZDR, as presented in this thesis, makes it possible of performing steady-state and transient calculations for SFRs on reactor core level by using DYN3D. With this study, the basis of the next stage of DYN3D developments is established, that is, the up-scale of SFR analysis to system level can continue by coupling with a sodium capable thermal-hydraulic system code.

EPFL2019